I got this thing done and now I'm kicking myself for geting rid of it , but Mr. Eddie Watters is gonna try to get into the 1000yd club this year with it.
here are the specs
Rem model 7 action fully blueprinted with oversized PT&G bolt with Sako extractor , rear screw hole opened up to 1/4x28 screw like the short action Rem 700 , Greg Tannel firing pin assembly and PT&G single shot follower glued in.
Bartlein 6mm barrel , 1-7.5 twist 5R rifling finished at 27" with Holland lug all polished out with 90 deg recessed target crown
Joel Russo A5L stock in Black and Brown , fitted for a better grip right handed , large oversized contured pillers and fully bedded with over 1 pound of Devcon liquid steel , finished with 18 rubbed in coats of Helmsman Spar urethane semi gloss .