Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Photography > Gun Photos


Reply

6.5x284 Full Custom

 
LinkBack Thread Tools Display Modes
  #15  
Old 08-08-2013, 09:07 PM
Silver Member
 
Join Date: Mar 2010
Location: Woohoo back in Wyo!!
Posts: 495
Re: 6.5x284 Full Custom

Don't have a 6.5x284. I'm too partial to the 6.5-06AI but most I've shot seem to like both 1000 and Ret. if your getting the vel you want out of your 4831 I think you have a winner. How far off the lands?
Reply With Quote
  #16  
Old 08-09-2013, 10:56 AM
BMF BMF is offline
Silver Member
 
Join Date: Jul 2008
Location: Near Fowler/St Johns...Michigan
Posts: 133
Re: 6.5x284 Full Custom

.006 - .007
Im still working the powder up because im trying to find my slight pressure wall while hoping to find an ES in the single to low double digits in the process.
Reply With Quote
  #17  
Old 08-09-2013, 03:22 PM
Silver Member
 
Join Date: Mar 2010
Location: Woohoo back in Wyo!!
Posts: 495
Re: 6.5x284 Full Custom

Might try .020-.030" off and see what that does to your ES. are you measuring off the ogive or tip? My 7mm and most my 6.5's shoot well seated that far off and all have ES 15 Fps or less. Most are less than 10. I use a lot of H1000 Ret and Ramshot mag.
Reply With Quote
  #18  
Old 08-09-2013, 09:35 PM
Silver Member
 
Join Date: Dec 2011
Location: West Texas
Posts: 133
Re: 6.5x284 Full Custom

Nice Rifle looks like it will shoot to.
Reply With Quote
  #19  
Old 08-10-2013, 04:50 PM
BMF BMF is offline
Silver Member
 
Join Date: Jul 2008
Location: Near Fowler/St Johns...Michigan
Posts: 133
Re: 6.5x284 Full Custom

Thanks trigger puller....
I am measuring off the ogive. So you think by playing ( backing off )with my seating depth i can manipulate my ES, with the same charge? To my way of thinking, it doesn't seem like that would affect it too much. But...........I have been proven wrong many a times. I might have too try it.
Brent
Reply With Quote
  #20  
Old 08-10-2013, 04:56 PM
Platinum Member
 
Join Date: Jan 2008
Location: Falls Church, VA
Posts: 3,103
Re: 6.5x284 Full Custom

Quote:
Originally Posted by BMF View Post
Thanks trigger puller....
I am measuring off the ogive. So you think by playing ( backing off )with my seating depth i can manipulate my ES, with the same charge? To my way of thinking, it doesn't seem like that would affect it too much. But...........I have been proven wrong many a times. I might have too try it.
Brent
Modifying your seating depth can certainly have an effect on ES. As you move the bullet in or out of the case, you change the internal dimension of the case and as a result the pressure changes and that can change your ES.
__________________
I'm not gonna shoot here. I'm gonna shoot waaaaaaaay over there!
Reply With Quote
  #21  
Old 08-10-2013, 08:36 PM
BMF BMF is offline
Silver Member
 
Join Date: Jul 2008
Location: Near Fowler/St Johns...Michigan
Posts: 133
Re: 6.5x284 Full Custom

Quote:
Originally Posted by CPGfan View Post
Might try .020-.030" off and see what that does to your ES. are you measuring off the ogive or tip? My 7mm and most my 6.5's shoot well seated that far off and all have ES 15 Fps or less. Most are less than 10. I use a lot of H1000 Ret and Ramshot mag.
Actually i was thinking of trying Ramshot because i have almost a full 1lb container in storage.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Current Poll
Do You Shoot Rifle Competition?
YES - 34.13%
732 Votes
NO - 65.87%
1,413 Vote
Total Votes: 2,145
You may not vote on this poll.

All times are GMT -5. The time now is 08:54 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC