Angle Shooting - Correcting For The Effects Of Gravity by Ward Brien

[Eaglet]

Originally Posted by japhunter

I have been having trouble matching ballistic software results to the real tradjectory measured . I am in the proccess of going througn the many obvious varailbles but i am now wondering weather there is some correction for having a 20 moa one picatiny rail that i should be making ?
Regrds Jap Hunter NZ

japhunter,

The 20 MOA rail all it does is help for the Vertical adjustment, it won't mess you up with matching your software trajectories.

[cdoubleu]

Jap Hunter,
If you are having problems matching your trajectory these will be your biggest obstacles: Accurate muzzle velocity (backwards calculated from chronographed speed, and distance measured from the barrel), An accurate BC (not necessarily listed), and finally, insuring that your scope's click value is actually what it is advertised as. To check the adjustment value, zero your rifle at 100y/100m what ever you use as a standard, pick an aim point at the bottom of the target and in half or full turret revolutions verify the distance between group centers exactly what they should be in click values. Example: @100yds, 1MOA=1.047", change vertical adjustment up 10MOA=10.47", fire a group, hopefully your group is 10.5" high. This may take a tall target depending about your scope's elevation abilities, but an appropriate target (hung vertically with a plumb bob) will tell you wonders about your scope.
As previously mentioned, the difference of 1/3 of a degree of angle (20MOA) isn't going to make a noticiable difference in trajectory, even at 1000yds it's much smaller than even the best are able to shoot. You wouldn't be able to correct for it either because it is less than one click value on 0.25MOA or .1MIL adjustment scopes.

[HUAINAMACHERO]

Just read the article. Very educating, thanks for it. Will be purchasing a ACI and mounting system soon!!!