close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Free Classifieds - Buy or Sell > Gun Parts - Stocks, Barrels, Actions, etc.

Reply

SOLD (2) New Brux Barrells chambered .260 Rem for Savage small shank

LinkBack Thread Tools Display Modes
  #1  
Unread 01-22-2011, 10:59 PM
SPONSOR
 
Join Date: Mar 2004
Location: Danville, PA
Posts: 1,110
SOLD (2) New Brux Barrells chambered .260 Rem for Savage small shank

I had a few extra Brux barrel blanks here and decided to go ahead and thread, chamber and crown them. All work done by Montour County Rifles. They are stainless / .264 cal. / 1-8 twist / 26" finished length / .875 muzzle dia. / chambered in .260 Rem. / Recessed crown / Threaded for Savage small shank 1.055 x 20 tpi. / 320 grit finish.

$400 plus $10 for shipping each.

1st. to post I'll take em'... gets em'.

Thanks

__________________
Home of the "EXTENDED IMPACT" DVD

www.mcrifles.com

Last edited by Kevin Cram; 02-01-2011 at 07:46 AM.
Reply With Quote
  •   #2  
    Unread 01-25-2011, 12:36 PM
    SPONSOR
     
    Join Date: Mar 2004
    Location: Danville, PA
    Posts: 1,110
    Re: F/S (2) New Brux Barrells chambered .260 Rem for Savage small shank

    If you purchase both barrels I'll cover the shipping.
    __________________
    Home of the "EXTENDED IMPACT" DVD

    www.mcrifles.com
    Reply With Quote

      #3  
    Unread 01-26-2011, 01:33 PM
    Gold Member
     
    Join Date: Jun 2007
    Location: BLOOMSBURG, PA
    Posts: 937
    Re: F/S (2) New Brux Barrells chambered .260 Rem for Savage small shank

    Awesome deal on some brand new barrels...

    To bad I'm not into Savages
    Reply With Quote
      #4  
    Unread 01-27-2011, 12:12 PM
    Junior Member
     
    Join Date: Aug 2010
    Posts: 8
    Re: F/S (2) New Brux Barrells chambered .260 Rem for Savage small shank

    are these still available? These will fit a savage 10 right? oh and who chambered them? thanks Ray
    Reply With Quote
      #5  
    Unread 01-27-2011, 12:46 PM
    SPONSOR
     
    Join Date: Mar 2004
    Location: Danville, PA
    Posts: 1,110
    Re: F/S (2) New Brux Barrells chambered .260 Rem for Savage small shank

    I have one spf but still have one left that's not spoken for. This should fit the Savage model 10 pending.

    Up until 2001 all Savage actions utilized a barrel with a nominal barrel thread diameter of 1.05". Soon after Savage started introduced Super Short and Ultra Mags in 2001, they began utilizing a slightly larger barrel thread diameter of 1.125" for those rifles only. Some standard magnum chambering (i.e. 300 Winchester Magnum etc.) were also fabricated using the larger barrel thread at that same time. Savage had announced that they are in the process of switching all actions to the the larger 1.125" diameter thread, but they have retreated from that statement somewhat. Only a few (some series "G") standard caliber rifles have been built with the larger thread. Rifles with the larger thread have had a noticeable 'step' in the profile right after the threads..

    I (Kevin Cram) chambered the barrel. I'm owner / operator of Montour County Rifles.
    __________________
    Home of the "EXTENDED IMPACT" DVD

    www.mcrifles.com
    Reply With Quote
      #6  
    Unread 01-27-2011, 12:56 PM
    Gold Member
     
    Join Date: Jun 2007
    Location: BLOOMSBURG, PA
    Posts: 937
    Re: F/S (2) New Brux Barrells chambered .260 Rem for Savage small shank

    Quote:
    Originally Posted by Kevin Cram View Post
    I have one spf but still have one left that's not spoken for. This should fit the Savage model 10 pending.

    Up until 2001 all Savage actions utilized a barrel with a nominal barrel thread diameter of 1.05". Soon after Savage started introduced Super Short and Ultra Mags in 2001, they began utilizing a slightly larger barrel thread diameter of 1.125" for those rifles only. Some standard magnum chambering (i.e. 300 Winchester Magnum etc.) were also fabricated using the larger barrel thread at that same time. Savage had announced that they are in the process of switching all actions to the the larger 1.125" diameter thread, but they have retreated from that statement somewhat. Only a few (some series "G") standard caliber rifles have been built with the larger thread. Rifles with the larger thread have had a noticeable 'step' in the profile right after the threads..

    I (Kevin Cram) chambered the barrel. I'm owner / operator of Montour County Rifles.
    WOW

    Your like a modern day Yoda
    Reply With Quote
      #7  
    Unread 01-29-2011, 04:32 PM
    Bronze Member
     
    Join Date: Jan 2011
    Posts: 58
    Re: F/S (2) New Brux Barrells chambered .260 Rem for Savage small shank

    pm sent
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: SOLD (2) New Brux Barrells chambered .260 Rem for Savage small shank
    Thread Thread Starter Forum Replies Last Post
    wtt / wts 2 small shank savage barrels bart1974 Gun Parts - Stocks, Barrels, Actions, etc. 5 08-01-2011 04:43 PM
    WTB: Savage Small Shank bbl - 204 Ruger nomo4me Gun Parts - Stocks, Barrels, Actions, etc. 0 06-02-2011 01:37 AM
    WTS/WTT Small Shank .300 RUM Setup - SOLD 406pat Gun Parts - Stocks, Barrels, Actions, etc. 2 02-08-2011 08:46 AM
    wtb small shank s/s savage 110 barrel bart1974 Gun Parts - Stocks, Barrels, Actions, etc. 4 01-08-2011 12:31 PM
    Savage small shank .308 barrel mk1cheetah Gun Parts - Stocks, Barrels, Actions, etc. 0 08-29-2010 10:36 PM


    All times are GMT -5. The time now is 09:22 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC