close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Free Classifieds - Buy or Sell > Gun Parts - Stocks, Barrels, Actions, etc.

Reply

Hart rifle barrels

LinkBack Thread Tools Display Modes
  #1  
Unread 12-07-2012, 12:54 AM
Silver Member
 
Join Date: Jul 2012
Location: Texas
Posts: 107
Hart rifle barrels

I HAVE 2 BLANK 26" RIFLE BARRELS THAT I ORDERED AND HAVE NEVER TAKEN OUT OF THE BOX THEY WERE SHIPPED IN. I RAN LOW ON SOME MONEY FOR THESE 2 PROJECTS AND DECIDED TO NOT USE THEM. I WILL SHIP AND NOT LOOKING FOR TRADES. QUESTIONS PLEASE EMAIL GUNEMDOWN2012@GMAIL.COM ..

7MM (.284) #4 CONTOUR 1-9 TWIST, STAINLESS

30 CAL #4 CONTOUR, 1-10 TWIST, STAINLESS

"Hart Rifle Barrels are produced with only the highest grade of stainless steel. We only make one grade of barrel. We do not sell a second best! Our barrels are button rifled with six grooves. All barrels are made to the customer's specifications as to caliber, twist, and contour. Each barrel is contoured on a CNC lathe, then hand lapped to ensure the best possible interior finish. Every barrel leaving our shop is individually inspected several times to make sure it meets our high quality standards." -FROM THEIR WEBSITE
Reply With Quote
  •   #2  
    Unread 12-07-2012, 01:37 AM
    Silver Member
     
    Join Date: Oct 2010
    Location: Jackson Hole, WY
    Posts: 313
    Re: Hart rifle barrels

    Will these finish at 26" or will the finished product loose a little bit of length? How much do you want for the barrels?
    Reply With Quote

      #3  
    Unread 12-07-2012, 01:42 AM
    Silver Member
     
    Join Date: Jul 2012
    Location: Texas
    Posts: 107
    Re: Hart rifle barrels

    They are 26 but ur gunsmith can cut them to whatever length u want. I don't think there's a problem keeping the barrel 26 and not having any of it cut but that I don't know for sure. I have $335 w shipping in them and would like to get the $315 back.
    Reply With Quote
      #4  
    Unread 12-07-2012, 06:47 AM
    alf alf is offline
    Gold Member
     
    Join Date: Nov 2007
    Location: S. W. Wisconsin
    Posts: 714
    Re: Hart rifle barrels

    Most barrel makers recommend cutting an inch off the muzzle end due to a slight belling from the lapping process.
    Reply With Quote
      #5  
    Unread 12-07-2012, 01:32 PM
    Silver Member
     
    Join Date: Feb 2010
    Location: Pocatello Idaho
    Posts: 480
    Re: Hart rifle barrels

    all the hart barrels ive seen have a small index cut about an inch from muzzle, measure from there to chamber end and that will give you finish length
    Reply With Quote
      #6  
    Unread 12-07-2012, 09:02 PM
    Silver Member
     
    Join Date: Oct 2009
    Location: Texas panhandle
    Posts: 264
    Re: Hart rifle barrels

    Quote:
    Originally Posted by alf View Post
    Most barrel makers recommend cutting an inch off the muzzle end due to a slight belling from the lapping process.
    would cutting the crown take care of this? or would the whole inch be affected
    Reply With Quote
      #7  
    Unread 12-07-2012, 10:17 PM
    Silver Member
     
    Join Date: Feb 2010
    Location: Pocatello Idaho
    Posts: 480
    Re: Hart rifle barrels

    They do it because when hand lapped it oversizes the bore a smidge on both ends from when the lapping compound enters the end of barrel so they want you too cut about an 1" to 1 1/4" off the muzzle end and when reamed it cleans up the chamber end
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Hart rifle barrels
    Thread Thread Starter Forum Replies Last Post
    Hart barrels for sale Shumba Gun Parts - Stocks, Barrels, Actions, etc. 6 02-04-2012 05:08 PM
    Rifles FS: Hart Rifle Barrels, Dowling, Heym, etc dlyon16 Guns For Sale 0 02-13-2011 10:12 PM
    Hart barrels? eyeballjr Rifles, Bullets, Barrels & Ballistics 8 01-03-2011 11:53 PM
    anyone have 7mm hart or 30 Hart caliber rifle? mrbb Rifles, Bullets, Barrels & Ballistics 4 06-29-2008 03:06 PM


    All times are GMT -5. The time now is 04:01 PM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC