Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Free Classifieds - Buy or Sell > Reloading Equipment and Components


Reply

WTS .264 Mag Brass and multiple dies

 
LinkBack Thread Tools Display Modes
  #1  
Old 05-17-2012, 01:22 PM
Junior Member
 
Join Date: Sep 2010
Location: Redmond Oregon
Posts: 14
WTS .264 Mag Brass and multiple dies

I have a total of 322 .264 Mag brass nearly all Win. and a few Rem. for sale as one lot for a very good price. All brass is cleaned, some fully prepped, some neck sized only. All are sorted , bagged and tagged as to show their current prep state, how many times fired and sized. None sized over 2 times. I kept very good track of my loads and you wont be dissapointed I assure you. The following listing will show the Brass . I am ssking $85.00 for all of the brass and the dies are listed seperately. Shipping not included.

Thanks for lookin,

10 Spot

(36) Rem. cases, 16 are new untouched, 20 fired 1x , clean, unprepped

(87) Win. cases fired 2x, sized 1x, cleaned , unprepped

(46) Win. cases fired 2x , are neck sized, trimmed, primer pockets have been uniformed , may need full length sizing if wont chamber

(74) Win. cases fired factory ammo, cleaned and sized for 1st time, not trimmed , primer pockets need cleaned

(27) Win. cases from fired factory ammo, cleaned, trimmed, primer pockets uniformed, neck sized only, recommend to full lenth size first

(20) Win. cases loaded new, fired 1x, cleaned only, no prep work

(32) Win. cases fired 3x, sized 2x prior, cleaned but no prep work

RCBS 2 die set $20.00

Redding series "B" neck sizing die ( less than 100 cases ran through ) $20.00

Lee Factory Crimp Die ( custom order ) $15.00

Shippin will be best economy to you , flat rate priority on the brass for sure,,,

Last edited by 10 Spot Terminator; 05-17-2012 at 01:24 PM. Reason: spelin
Reply With Quote
  #2  
Old 06-27-2012, 05:00 PM
Junior Member
 
Join Date: Jun 2012
Location: Elizabeth CO
Posts: 12
Re: WTS .264 Mag Brass and multiple dies

Still have the brass? Will you separate?

Thanks

Ryan
Reply With Quote
  #3  
Old 06-27-2012, 08:35 PM
Junior Member
 
Join Date: Sep 2010
Location: Redmond Oregon
Posts: 14
Re: WTS .264 Mag Brass and multiple dies

Hello Duckdog28 ,

Are you interested in all of the brass but not the dies or are you asking for just some of the brass ???

10 Spot
Reply With Quote
  #4  
Old 06-27-2012, 10:12 PM
Silver Member
 
Join Date: Jun 2010
Posts: 143
Re: WTS .264 Mag Brass and multiple dies

I'll take both sets of 264wm dies for $40.00 shipped snail mail to Roseburg?
Thanks
Bob
Reply With Quote
  #5  
Old 07-06-2012, 04:55 PM
Junior Member
 
Join Date: Sep 2011
Posts: 17
Re: WTS .264 Mag Brass and multiple dies

If you still have the redding neck sizer die, I will take it.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: WTS .264 Mag Brass and multiple dies
Thread Thread Starter Forum Replies Last Post
25-06 brass, dies, bullets, and 308 dies gooseman Reloading Equipment and Components 0 07-25-2011 05:42 PM
338 lapua brass, 30 cal bergers, 223 wssm dies, 308 dies jacack Reloading Equipment and Components 5 12-06-2010 10:26 PM
25-06 reloading dies, brass, and bullets / 45ACP brass jeffro Reloading Equipment and Components 1 05-01-2010 10:51 AM
WTB: 6.5x284 dies and brass/6x47lapua brass Dhughes Reloading Equipment and Components 1 03-07-2010 06:06 PM
FS 7mm Rem Mag brass/dies/bullets,7/08 brass/dies/bullet 308 brass/dies/bullets acloco Reloading Equipment and Components 0 02-15-2009 10:52 PM


All times are GMT -5. The time now is 11:35 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC