close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Free Classifieds - Buy or Sell > Reloading Equipment and Components

Reply

WTB 300 RUM Brass

LinkBack Thread Tools Display Modes
  #1  
Unread 04-19-2013, 06:50 PM
Gold Member
 
Join Date: Jul 2007
Posts: 711
WTB 300 RUM Brass

I would like to buy some 300 RUM brass. If anyone has any or knows where I can buy some I would appreciate it. I would prefer Nosler headstamp rather than the Remington but would take any at this point.
Thanks,
Brian
Reply With Quote
  •   #2  
    Unread 04-20-2013, 09:21 AM
    Gold Member
     
    Join Date: Jul 2007
    Posts: 711
    Re: WTB 300 RUM Brass

    ttt
    Reply With Quote

      #3  
    Unread 04-21-2013, 05:50 AM
    Platinum Member
     
    Join Date: May 2012
    Posts: 4,108
    Re: WTB 300 RUM Brass

    You will likely have to buy factory rounds. I only know of one place locally that has any 300 rum brass and they want nearly as much as the slow loads by rem just for their brass. Have you been watching the inventory at shooters pro shop for the nos brass?? Sometimes they also have blem ammo at pretty decent prices...
    Reply With Quote
      #4  
    Unread 04-21-2013, 08:46 PM
    Silver Member
     
    Join Date: Oct 2009
    Location: San Fernando Valley
    Posts: 114
    Re: WTB 300 RUM Brass

    i might have a new bag of Federal im going to look
    Reply With Quote
      #5  
    Unread 04-23-2013, 09:56 PM
    Bronze Member
     
    Join Date: Jan 2013
    Location: Rapid city SD
    Posts: 34
    Re: WTB 300 RUM Brass

    I can get you some. it is Rem brass at 65$ per bag. have 5 or 6 bags.
    Reply With Quote
      #6  
    Unread 04-24-2013, 02:23 PM
    Gold Member
     
    Join Date: Jul 2007
    Posts: 711
    Re: WTB 300 RUM Brass

    Thanks for letting me know k8hvntn. I really would prefer the Nosler headstamp 300 RUM brass as that is what I have used for 6 years. I am going to try the Remington headstamp 300 RUM brass and see how it shoots in my gun. Like I said I've never used it and really never thought about using the Remington since the Nosler always shot very well in my gun.
    I will keep you in mind if the Remington works for me. By the way, does anyone tried these two different kinds of brass and seen if there is any difference as far as accuracy goes?
    Thanks to all who have responded to my request. I really appreciate your help!
    Reply With Quote
      #7  
    Unread 04-24-2013, 06:53 PM
    Bronze Member
     
    Join Date: Jan 2013
    Location: Rapid city SD
    Posts: 34
    Re: WTB 300 RUM Brass

    I have shot both. when I made my saum my gunsmith had some nos. brass. I shoot it with my rem brass and shoot the same. Rem brass although needs some work. (which is the main diff most high dollar brass.) the rem needs the primer pockets need reamed to get rid of the burs, trim the necks to a uniform length, turn the necks to a uniform thickness. than I anneal them to get them to uniform tensions. the annealing does not really need to be done to right away but I neck them down for my 7 saum. any way if you want some I know how hard it is to find the critters right now. thought I built my saum and would not find brass.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 09:44 AM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC