Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Free Classifieds - Buy or Sell > Reloading Equipment and Components


RCBS #43 trim case shell holder

LinkBack Thread Tools Display Modes
Unread 06-21-2007, 12:12 PM
Platinum Member
Join Date: Jun 2003
Location: Hermiston, Oregon
Posts: 2,026
RCBS #43 trim case shell holder

Guys I'm looking for one of these. I need one so I can trim my 7 WSM cases. I cant reload anymore till I get it done, there over the max length. Come to fidn out, I dont have the correct plate holder.

Anyone got one laying around they dont use anymore and want to get rid of?? I dont wanna just order a $5 part from a magazine and get charged up the butt for shipping on a single little item. Hoping maybe someone here has one and dont use it anymore or somethign.. Will obviously pay for it and shipping.

My local bi mart carries them, but not this number, go figure!! They cant order it for me either.. [img]/ubbthreads/images/graemlins/mad.gif[/img]

Reply With Quote

Unread 06-23-2007, 06:08 PM
Gold Member
Join Date: Jan 2005
Location: Western MI
Posts: 718
Re: RCBS #43 trim case shell holder


Call RCBS and see if you can buy one from them and have it sent US mail. RCBS Customer Service 1-800-533-5000

Reply With Quote
Unread 06-25-2007, 09:19 PM
Platinum Member
Join Date: Mar 2007
Location: MN
Posts: 1,219
Re: RCBS #43 trim case shell holder

It will probably cost you less than $10 from midway.com
I used to re-load but now I "hand-load".
-- Well, at least I try --
Reply With Quote
Unread 06-27-2007, 06:06 AM
Junior Member
Join Date: Apr 2007
Posts: 9
Re: RCBS #43 trim case shell holder

It will probably cost you less than $10 from midway.com

[/ QUOTE ]

Actually would be $11.81 shipped 1st class mail. $5.99 for the part, $2.82 shipping and then Midway bones you for an additional $3 dollars additional handling if your order is less than $25.

I got boned the same way on a RCBS herters adapter
Reply With Quote
Unread 06-28-2007, 03:27 PM
Platinum Member
Join Date: Nov 2003
Location: Washington State
Posts: 2,726
Re: RCBS #43 trim case shell holder


Just curious if you have one of these. They can save you alot of trimming by knowing your own chamber length. You may not need to trim to some spec in a book somewhere. Instead trim based on your actual chamber length and perhaps keep a longer neck in the process. In Sinclair's book they talk about trimming to .021 less than your chamber length--this is just average number taken from SAAMI spec for several cases, but with this guage you can apply the concept, not just the 'by the book' because that's what the book says philosophy. My 300 RUM chamber length is 2.868 (over SAAMI specs if I recall correctly) and I trim to 2.838 which gives 'em some room to grow over several firings without having to trim again.
In the beginning God created the heavens and the earth. Genesis 1:1

"And can the liberties of a nation be thought secure when we have removed their only firm basis, a conviction in the minds of the people that these liberties are the gift of God?" Thomas Jefferson - Notes on the State of Virginia

www.wildsidesystems.com - Shelter for Your WildSide - http://www.youtube.com/watch?v=tYwgo...&feature=g-upl
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: RCBS #43 trim case shell holder
Thread Thread Starter Forum Replies Last Post
WTB magnum case head shell holder jeffro Reloading Equipment and Components 0 12-17-2010 03:38 PM
Lee Bullet Seating Die, Shell Holder and Storage Case trebark Reloading Equipment and Components 0 06-27-2009 10:24 PM
WTS-RCBS 7mm RUM die set, wilson case holder arthurj Guns For Sale 1 05-18-2005 11:35 AM
WTS: RCBS 300WSM FL Die Set, Neck Die & Shell Holder... SOLD Bronson90 Guns For Sale 0 03-18-2005 09:29 AM
WTS: NIB RCBS 300WSM Dies & Shell Holder... DFW, TX... Bronson90 Guns For Sale 0 02-04-2005 11:23 AM

All times are GMT -5. The time now is 12:08 PM.

Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC