close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Free Classifieds - Buy or Sell > Reloading Equipment and Components

Reply

338 Lapua brass, 45-70 ammo, TRG & Nightforce stuff

LinkBack Thread Tools Display Modes
  #1  
Unread 12-30-2013, 10:56 PM
Silver Member
 
Join Date: Oct 2002
Posts: 143
338 Lapua brass, 45-70 ammo, TRG & Nightforce stuff

annual cleaning of unused and the unlikely to


once fire .338 Lapua brass , shot from my TRG. Midway gets $2.58 each. $175/100 DELIVERED- to include shipping- cont US

brand new sealed box Buffalo Bore 45-70 ammo 430gr 1925 fps $50

brand new in sealed package, Nightforce Ultralight 30mm rings, 1.00" (medium) T-6 & Titanium, Midway gets $160 +, I'll take $145 and deliver them to you.

brand new in sealed package- Warne Maxima Pictinny 20 moa Rail for Sako TRG 22 or 42, Midway gets $105+ I'll deliver for $85

Thank you
__________________
honey, all I need is just one more, I promise!
Reply With Quote
  •   #2  
    Unread 12-31-2013, 10:41 PM
    Bronze Member
     
    Join Date: Dec 2010
    Posts: 68
    Re: 338 Lapua brass, 45-70 ammo, TRG & Nightforce stuff

    Does the Warne Pictinny Rail fit on the Dovetail (Optilock) type receiver?

    If so I would like it.

    Thanks,

    Tony
    Reply With Quote

      #3  
    Unread 01-02-2014, 08:01 AM
    Silver Member
     
    Join Date: Oct 2002
    Posts: 143
    Re: 338 Lapua brass, 45-70 ammo, TRG & Nightforce stuff

    yes it is but drilled specifically for the TRG's...any TRG. Is that what you have? Thank you
    __________________
    honey, all I need is just one more, I promise!
    Reply With Quote
      #4  
    Unread 01-02-2014, 08:15 AM
    Bronze Member
     
    Join Date: Dec 2010
    Posts: 68
    Re: 338 Lapua brass, 45-70 ammo, TRG & Nightforce stuff

    Yes, TRG-S, not sure if they are all the same. I understand that some of the early 22's used the Optilock platform but not the newer ones.
    Reply With Quote
      #5  
    Unread 01-02-2014, 08:23 AM
    Silver Member
     
    Join Date: Oct 2002
    Posts: 143
    Re: 338 Lapua brass, 45-70 ammo, TRG & Nightforce stuff

    is it drilled and tapped for 4 screws on top? I'm almost positive same receiver...I have installed a jillion of these...my favorite base for these hands down...if you want to send me a pic from the top and hole spacing Ill measure and confirm
    __________________
    honey, all I need is just one more, I promise!
    Reply With Quote
      #6  
    Unread 01-02-2014, 09:27 AM
    Bronze Member
     
    Join Date: Dec 2010
    Posts: 68
    Re: 338 Lapua brass, 45-70 ammo, TRG & Nightforce stuff

    I have not taken posession of the rifle yet. From what I can tell the TRG-S is not pre-drilled so spacing doesn't matter.
    Reply With Quote
      #7  
    Unread 01-02-2014, 03:40 PM
    Silver Member
     
    Join Date: Oct 2002
    Posts: 143
    Re: 338 Lapua brass, 45-70 ammo, TRG & Nightforce stuff

    it would need to be d&t'ed to utilize this base....I would suggest a machinist doing it on a mill if going that route. If you dont need the 20 moa Talleys are a nice way to go too. Let me know if I can help. The TRGS's are great rifles....really went unnoticed when I ran a gun store then after they quit everyone figured out what a great rifle they were
    __________________
    honey, all I need is just one more, I promise!
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 07:40 PM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC