Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


X mark pro trigger spring

LinkBack Thread Tools Display Modes
Unread 01-06-2012, 12:05 AM
Silver Member
Join Date: Dec 2010
Posts: 168
X mark pro trigger spring

anybody here use the ernie the gunsmith replacement trigger spring for the rem. x mark pro trigger? how do they work? can you really get your trigger down to 3lbs or so safely?
Reply With Quote

Unread 01-17-2012, 07:24 PM
Junior Member
Join Date: Apr 2011
Location: lexington ky
Posts: 2
Re: X mark pro trigger spring

yey they work ,it has been a year scince i changed it, but i think it replaces the weight spring on the trigger, it brought my pull down to 2-3/4 to 3 pounds and it is a consistant pull, before changing spring i could only get it down to about 4 pounds and it was not consistant ranged from 3-1/2 to 4-1/2 pounds
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: X mark pro trigger spring
Thread Thread Starter Forum Replies Last Post
Jewell HVR Trigger Spring Change ? Varmint Hunter Gunsmithing 4 09-24-2013 10:48 AM
X-mark trigger jsthntn247 Gunsmithing 4 04-10-2011 01:09 PM
oops...not 40x trigger, x mark pro trigger big mike 2121 Long Range Hunting & Shooting 4 01-16-2011 09:22 PM
Remington 700 X-Mark trigger safety wanted or Whole trigger RH RIMROX Gun Parts - Stocks, Barrels, Actions, etc. 2 08-01-2010 08:11 AM
Rem. x-mark trigger soren Gunsmithing 1 09-20-2008 03:22 AM

All times are GMT -5. The time now is 06:16 AM.

All content ©2010-2015 Long Range Hunting, LLC