Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Winchester M70 CRF safety problem

LinkBack Thread Tools Display Modes
Unread 01-01-2013, 11:06 PM
Bronze Member
Join Date: Sep 2011
Location: Flyover country Oklahoma and love it.
Posts: 36
Winchester M70 CRF safety problem

In Aug. of 2012 I received my custom built Winchester 7wsm from a respected rifle builder. Every time I've taken it out to shoot I have at least one failure to fire with the safety off. The rifle acts as though the safety is on and will not fire. When I try to rotate the safety to the "on" position it will not rotate and acts like it is bound up some how. The only way to fire or free up the safety is to re-cock the bolt. I've emailed the builder twice and called and left messages two times and have left PM's on their account and have gotten no response yet.

Does anyone have an idea as to what the problem could be and can anyone suggest a builder here in Oklahoma to fix it? I know Jon Beanland does great work and there is a builder in Weatherford Okla. (Teds Custom Shop) but I don't know much about him.

My action is a M70 CRF.
Reply With Quote

Unread 01-02-2013, 01:07 AM
Platinum Member
Join Date: Jan 2008
Location: Northeast
Posts: 3,623
Re: Winchester M70 CRF safety problem

I'm not sure the problem is the same one but I had a sticky safety on a late Model 70 that was easily fixed by spraying a little Rem oil where the detent ball is located. The gun was new and it seemed like there was some rust or debris that got into the system.

"Let us speak courteously, deal fairly, and keep ourselves armed and ready"-T. Roosevelt
Reply With Quote


Thread Tools
Display Modes

All times are GMT -5. The time now is 03:51 PM.

All content ©2010-2015 Long Range Hunting, LLC