close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing

Reply

where to go for re-barrel ?

LinkBack Thread Tools Display Modes
  #1  
Unread 01-31-2010, 06:06 PM
gdc gdc is offline
Junior Member
 
Join Date: Dec 2009
Posts: 6
where to go for re-barrel ?

hi guys- I realize this ques. has alot of possibilties, but, lookin to rebarrel a 22-250 rem in a ss. 26"+-. Anyone come to mind that you'd be proud to recc.. alot of coyotes and prarie dogs will go up in smoke. Thanks for the same, enjoy the site. jc
Reply With Quote
  •   #2  
    Unread 01-31-2010, 06:19 PM
    Platinum Member
     
    Join Date: Aug 2005
    Location: Murray, Ky.
    Posts: 1,300
    Re: where to go for re-barrel ?

    I would have to go with Jim See at Center Shot Rifles. Don't know how long it would take him to do a rebarrel but I sent a rifle to have a brake installed it was back to me in a weeks time. I might of cought him at a good time. Either way if I ever have something else done it will be by him.

    You'll find there are lots of very good smiths on this site.

    That's my .02 hope it helps,

    Nathan
    Reply With Quote

      #3  
    Unread 01-31-2010, 06:22 PM
    Gold Member
     
    Join Date: Jan 2007
    Location: Grafton, WI
    Posts: 601
    Re: where to go for re-barrel ?

    I dont think you'd go wrong with any of the gunsmiths on this site. I had Jim @ centershotrifles.com build my pistol and he did awesome work! When I find more money I'll be going with him for another build.
    Reply With Quote
      #4  
    Unread 01-31-2010, 06:25 PM
    Gold Member
     
    Join Date: Sep 2009
    Location: SW MT or noVA
    Posts: 986
    Re: where to go for re-barrel ?

    Any of the site sponsors such as Kirby Allen, Kevin Cram, Shawn Carlock are all v good (those are off the top of my head). It s
    depends on where your located, east coast, I can personaly reccomend Jeff Walker of walker custom rifles. He Judy built me a custom .308win, shoots lights out and he has a short turn-around. Prices are good too. Tell him Oliver Lottermann recommended him if you decide to go with him.

    -Oliver
    Reply With Quote
      #5  
    Unread 01-31-2010, 07:26 PM
    Gold Member
     
    Join Date: Feb 2009
    Location: Aberdeen, SD
    Posts: 557
    Re: where to go for re-barrel ?

    I have experience with both Jim at Center Shot Rifles and Shawn at Defensive Edge.

    Both first class
    Reply With Quote
      #6  
    Unread 02-01-2010, 11:10 AM
    Platinum Member
     
    Join Date: Jul 2007
    Posts: 1,045
    Re: where to go for re-barrel ?

    BERGARA bbls makes remington "drop ins" I use them, like them, and do it myself.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: where to go for re-barrel ?
    Thread Thread Starter Forum Replies Last Post
    6mm re-barrel brand,length and barrel twist mcseal2 Rifles, Bullets, Barrels & Ballistics 12 11-07-2010 08:14 PM
    wtb sendero barrel or like custom barrel in 7mm or 30 or 338 mag cal or hevier mayheel Gun Parts - Stocks, Barrels, Actions, etc. 3 02-23-2010 05:18 PM
    barrel question. Could a ss barrel be too hard to ream???? oldfamily Rifles, Bullets, Barrels & Ballistics 24 05-29-2009 08:46 AM
    which break, barrel length, barrel cotour, and twist? nathank Rifles, Bullets, Barrels & Ballistics 1 02-03-2009 08:31 PM
    barrel block,barrel and action dwarren Guns For Sale 1 02-26-2007 07:33 PM


    All times are GMT -5. The time now is 09:18 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC