Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Reply

webbing

 
LinkBack Thread Tools Display Modes
  #1  
Old 03-17-2012, 07:31 PM
Junior Member
 
Join Date: Nov 2010
Location: idaho
Posts: 27
webbing

I am about to duracoat my stock and i am trying to figure out how to get the webbing look with my air brush. Has anyone done this or should i just use the krylon webbing over the duracoat and then clear coat it? Thanks for any help
Reply With Quote
  #2  
Old 03-19-2012, 07:55 PM
Platinum Member
 
Join Date: Dec 2009
Location: NW MT
Posts: 2,651
Re: webbing

Not sure what you are refering, krylon? I got square grid at a fabric shop. Cut to different sizes and taped on in a diagonal fashion. Spray your coat at a 90 to the stock surface or you will mess up pattern
Attached Thumbnails - Click to View Larger
webbing-338-n.jpg  
Reply With Quote
  #3  
Old 03-19-2012, 10:58 PM
Junior Member
 
Join Date: Dec 2011
Posts: 21
Re: webbing

Duracoat, krylon webbing and then clear coat.
Reply With Quote
  #4  
Old 07-29-2012, 04:00 PM
Bronze Member
 
Join Date: Jul 2012
Posts: 69
Re: webbing

I've never been a fan of Krylon jobs. I've tested it on many surfaces and it doesn't hold up like apoxy based paint jobs. However, the Krylon webbing goes on differently and seems to be extremely durable, but is best over a duracoat, cerakote, or even an aluma hyde job.
Reply With Quote
  #5  
Old 07-30-2012, 10:05 AM
Official LRH Sponsor
 
Join Date: Dec 2006
Location: Utah
Posts: 125
Re: webbing

I use vieling lacquer then topcoat with acrylic urethane.
gives me a durable and consistent pattern.
Attached Thumbnails - Click to View Larger
webbing-halv1.jpg  
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes



All times are GMT -5. The time now is 05:46 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC