Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Tikka tight chamber

LinkBack Thread Tools Display Modes
Unread 04-04-2009, 07:16 AM
Junior Member
Join Date: Dec 2008
Location: Ile Bizard near Montreal
Posts: 26
Tikka tight chamber

I just bought a Tikka T3 and chambering factory ammo I have a small resistance closing the bolt,
so I took my Redding bump die and bumped the shoulder until it fit the chamber with ease,
with my stoney point I check the measurements and I have .005 between the factory and the bumped case....
every body says keep the rifle a tight chamber is more accurate......
would like some professional opinion on this please....
thank you Michel.....
Reply With Quote



Thread Tools
Display Modes

Similar Threads for: Tikka tight chamber
Thread Thread Starter Forum Replies Last Post
Tight neck chamber jon12 Rifles, Bullets, Barrels & Ballistics 35 07-07-2015 09:45 AM
Die help- tight die/loose chamber? goose Reloading 19 12-20-2010 10:43 PM
Sendero seems to have a tight chamber Tang Rifles, Bullets, Barrels & Ballistics 4 11-28-2009 08:22 PM
Creating tight neck brass for a factory chamber Alaskan338Lapua Reloading 10 06-11-2009 04:51 AM
Brass fired a few times, how tight is too tight ? Marine sniper Reloading 14 06-16-2008 12:59 PM

All times are GMT -5. The time now is 07:57 PM.

Powered by vBulletin ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC