close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing

Reply

Tikka B&C Medalist stock bedding questions

LinkBack Thread Tools Display Modes
  #1  
Unread 05-10-2013, 11:33 AM
Silver Member
 
Join Date: Jun 2012
Location: SE PA
Posts: 276
Tikka B&C Medalist stock bedding questions

I recently picked up a B&C medalist stock for my T3 lite. I dropped the action in the stock and took it to the range today. The best i was able to get out of it was around 3/4" groups at 100 yards which isnt bad but i know it can do better. I was thinking about bedding the rifle with devcon and was curious as to if i should do a full bedding job or just maybe the recoil lug since the rifle already has an aluminum bedding block. Any input would be appreciated.
Reply With Quote
  •   #2  
    Unread 05-12-2013, 10:15 PM
    Silver Member
     
    Join Date: Aug 2011
    Location: Zip code 13642
    Posts: 139
    Re: Tikka B&C Medalist stock bedding questions

    I would and always do a full skim job no matter what. I tell me customers since I'm already in there, I mine as well do it right. That way you also never second quess yourself.

    Reply With Quote

    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 01:46 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC