close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing

Reply

Stripping a Bell and Carlson

LinkBack Thread Tools Display Modes
  #1  
Unread 09-10-2013, 08:51 AM
Silver Member
 
Join Date: Mar 2009
Location: Tennessee
Posts: 126
Stripping a Bell and Carlson

What can I strip a BC stock with and not hurt the resin in the fiberglass?
Reply With Quote
  •   #2  
    Unread 09-10-2013, 12:11 PM
    Bronze Member
     
    Join Date: May 2013
    Location: Pearland. TX
    Posts: 72
    Re: Stripping a Bell and Carlson

    Drop a note to J E Customs. he did some work to my B&C an mentioned that the coating flaked off. A refinishing pad / disc might be the easy way, as opposed to a chemical stripper.
    __________________
    Mark
    KE5PPH
    Reply With Quote

      #3  
    Unread 09-12-2013, 12:23 PM
    Silver Member
     
    Join Date: Mar 2009
    Location: Tennessee
    Posts: 126
    Re: Stripping a Bell and Carlson

    I emailed Bell and Carlson and they said to not use any kind of stripper but rather sand it down to the gel coat then refinish.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 02:24 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC