Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Reply

Ruger trigger problems

 
LinkBack Thread Tools Display Modes
  #1  
Old 12-21-2009, 05:40 PM
Silver Member
 
Join Date: Sep 2009
Location: North West,Ohio
Posts: 443
Ruger trigger problems

Ihave a ruger mk77II target varmint in 22-250 and the trigger has felt inconsistant so I bought a lyman digital trigger pull gage the weight bounces around from 5lbs 3 oz to 1lb 3oz.What can I do for this or should i take it somewhere?
Reply With Quote
  #2  
Old 12-22-2009, 09:46 AM
Gold Member
 
Join Date: Jul 2007
Posts: 931
Re: Ruger trigger problems

i use rifle basix triggers in all my rugers. Good trigger, easy to install and very easy to set desired pull weight.
Reply With Quote
  #3  
Old 12-24-2009, 08:40 AM
Platinum Member
 
Join Date: Dec 2008
Location: Great Falls, MT
Posts: 4,520
Re: Ruger trigger problems

I have a Spech-Tech (Ruger M77MKII adjustable triggers) on my Ruger M77 MKII in .338 WM. It is currently set at 2 lbs and very please it with.

Good luck!
__________________

I voted for my "FREEDOM", "GUNS", and "MONEY" - keep the change - UNK.



"I am always proud of my country!"

"Leadership Rule #2: Don't be an @zzhole." - Maj Gen Burton Field.
Reply With Quote
  #4  
Old 12-24-2009, 11:57 AM
Silver Member
 
Join Date: Nov 2008
Location: Lincoln, NE
Posts: 185
Re: Ruger trigger problems

When replacing a Model 77 MkII on a varmint/target rifle, just be aware that they use a different trigger than the standard MkII. The varmint/target factory trigger is a two stage, and not all aftermarket MkII triggers will work on it. I found that after some careful stoning by my gunsmith, my factory trigger settled in at a very consistent pull weight. You might try that first...if not, just make sure you buy the right aftermarket, and you should be good to go.

Good luck,

Brian

Last edited by outofayr; 12-24-2009 at 12:02 PM. Reason: fixed smelling pistake
Reply With Quote
  #5  
Old 12-24-2009, 03:16 PM
Silver Member
 
Join Date: Sep 2009
Location: North West,Ohio
Posts: 443
Re: Ruger trigger problems

Thank you for all the info.Unfortunatly I have not been able to find one for the target ,varmint in 22-250 so I will have to try to find a gunsmith to send it to.
Does any one know of a good smith with a quick turn around time? i can`t seem to find any in northwest ,Ohio.
Reply With Quote
  #6  
Old 12-24-2009, 04:30 PM
Silver Member
 
Join Date: Nov 2008
Location: Lincoln, NE
Posts: 185
Re: Ruger trigger problems

Rifle Basix makes a good trigger to replace the varmint/target 2-stage trigger (RU-VT). Usually Brownells has them, but they're not listed on their website right now. Price is around $100 or so. Might try www.riflebasix.com for them.

Good luck,
Brian

Last edited by outofayr; 12-24-2009 at 04:41 PM. Reason: added website
Reply With Quote
  #7  
Old 12-26-2009, 12:18 PM
Gold Member
 
Join Date: Jul 2007
Posts: 931
Re: Ruger trigger problems

or try midway usa for trigger, rifle basix
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Ruger trigger problems
Thread Thread Starter Forum Replies Last Post
Timney trigger problems WV Sendero Gunsmithing 10 11-24-2013 01:54 AM
Timney Trigger - Problems tlk Gunsmithing 2 06-23-2009 07:17 PM
remington 788 trigger problems Sasquatch Gunsmithing 1 01-20-2008 01:57 PM
Rem 700 Trigger - BIG problems... Diezel Gunsmithing 4 12-02-2007 04:05 PM
Ruger #1 problems 7ultra Rifles, Bullets, Barrels and Ballistics 2 05-07-2004 04:18 PM

Current Poll
Do you wear hearing protection while hunting?

All times are GMT -5. The time now is 08:29 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC