Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Remmington Extractor ??

LinkBack Thread Tools Display Modes
Unread 10-24-2008, 06:53 AM
Platinum Member
Join Date: Dec 2002
Location: Northern Michigan
Posts: 1,014
Remmington Extractor ??

On average how much extractor should be showing when you measure the diameter of the bolt face then measure to the extractor. More than .017"??

I'm having a problem with a 300 RUM not extracting about 5% of the time. I've measured the cases and have not seen any noticeable difference from ones that eject and ones that don't.

Bolt face = .542"
To the extractor = .525"

Any help would be greatly appreciated.
Reply With Quote

Unread 10-29-2008, 10:47 PM
Gold Member
Join Date: Sep 2003
Location: Nebraska
Posts: 810
Re: Remmington Extractor ??

Its pretty simple, if its not extracting, its the extractor...remmmys crapo extractor system.

"Let the good times roll"
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: Remmington Extractor ??
Thread Thread Starter Forum Replies Last Post
Brand new remmington 700 take-off barrel, stock, etc muliemandan Gun Parts - Stocks, Barrels, Actions, etc. 2 07-21-2011 03:56 PM
6mm remmington loads retiredcpo Rifles, Bullets, Barrels & Ballistics 3 08-07-2010 08:20 PM
My remmington 243 VLS stock Mod Tikkatactical308 Rifles, Bullets, Barrels & Ballistics 1 02-27-2009 09:26 PM
Remmington J-Lock? MontanaRifleman General Discussion 2 01-27-2009 02:09 PM
WTS Remmington 700 ADL LA Gloss Walnut Stock far50shooter Gun Parts - Stocks, Barrels, Actions, etc. 1 04-06-2008 12:07 PM

All times are GMT -5. The time now is 03:33 PM.

All content ©2010-2015 Long Range Hunting, LLC