Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Rem 700 mis-drilled

LinkBack Thread Tools Display Modes
Unread 01-12-2010, 11:24 AM
Junior Member
Join Date: Mar 2004
Location: Soldotna, AK
Posts: 18
Re: Rem 700 mis-drilled

Sometimes it is better to leave things alone. It may be throwing curveballs, but they are all going in the same place. Now just shoot it until it is a smoothbore. That should only take about 10K rounds. ;)
Reply With Quote

Unread 01-20-2010, 10:44 PM
Bronze Member
Join Date: Feb 2008
Location: Texas
Posts: 78
Re: Rem 700 mis-drilled

I also have a Remington 700 that has the holes drilled off center. You can see this one with it with your eyes, it is about 1/16" off center, I have had the rifle for 9 years so I don't think that Remington would do anything about it. It is a sendero in 7 mag. and will drive tacks. I had to put on the Leupold 2 peice bases, and I also would like to put on a Piccatiney on so I can switch scopes from my other rifles, so I appreciate the info on the base. Thanks
Reply With Quote
Unread 01-21-2010, 06:14 AM
Platinum Member
Join Date: Jan 2007
Location: PA
Posts: 1,324
Re: Rem 700 mis-drilled

Call Holland and ask for a blank pic rail. Or, send them the rifle and have them install it.
Reply With Quote


Thread Tools
Display Modes

All times are GMT -5. The time now is 02:25 PM.

All content ©2010-2015 Long Range Hunting, LLC