Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Reciever/Factory BM

LinkBack Thread Tools Display Modes
Unread 03-06-2012, 07:22 PM
Bronze Member
Join Date: Jul 2008
Posts: 62
Reciever/Factory BM

Hello everyone, I ran into this problem today and don't know what to do. While putting this rifle togather I found that the reciever didn't have a lip on the bottom to catch the factory follower. I looked at another reciever I had and it has a lip on the bottom on it to catch the follower. I have encluded pictures of both reciever's. Other than installing a DBM on this reciever is there anything else I can do.
Thanks for your help.

Reply With Quote

Unread 03-07-2012, 02:05 AM
Platinum Member
Join Date: Mar 2005
Location: Utah
Posts: 1,375
Re: Reciever/Factory BM

Center feed mag box. Look at Wyatts outdoors.
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: Reciever/Factory BM
Thread Thread Starter Forum Replies Last Post
.308 Reciever. kc Gunsmithing 7 06-27-2010 01:48 PM
New Rem 700 RH LA Reciever & barrel wkt60 Gun Parts - Stocks, Barrels, Actions, etc. 0 03-17-2010 11:56 AM
phoenix precision RR reciever plus pacific tools bolt? lurcher Gunsmithing 2 07-28-2009 05:53 AM
Need Ruger 10-22 reciever 6.5x300 Gun Parts - Stocks, Barrels, Actions, etc. 2 03-07-2009 03:31 AM
Rem 721 reciever James Jones Gun Parts - Stocks, Barrels, Actions, etc. 1 01-13-2008 12:53 AM

All times are GMT -5. The time now is 08:21 PM.

Powered by vBulletin ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC