Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Rechambering info.....????

LinkBack Thread Tools Display Modes
Unread 02-09-2010, 08:18 AM
mo mo is offline
Silver Member
Join Date: Mar 2006
Location: mississippi
Posts: 432
Re: Rechambering info.....????

Fitch I appreciate when someone takes the time to make a post like yours. Thanks
Reply With Quote

Unread 02-09-2010, 11:05 AM
Platinum Member
Join Date: Jul 2004
Location: Texas
Posts: 7,241
Re: Rechambering info.....????


That was a very good post and should help anyone that is getting started !!!!!

I to built my own fixtures for doing the whole job and it's amazing how similar
mine are to yours. They may look a little different but they perform the same task
and its fun to build your own tooling and see how well they work.

It's also OK to practice on some mild steel stock to perfect your process for threading,
chambering and crowning.

Don't get in a hurry and you will do fine.

Reply With Quote
Unread 02-09-2010, 01:58 PM
Posts: n/a
Re: Rechambering info.....????

FITCH Great write up and very well explained so the novice has a good idea what is envolved.

Reply With Quote


Thread Tools
Display Modes

Similar Threads for: Rechambering info.....????
Thread Thread Starter Forum Replies Last Post
Rechambering a 6.8 spc timl Gunsmithing 3 12-06-2012 12:37 PM
Rechambering gp816 Rifles, Bullets, Barrels & Ballistics 9 11-05-2010 10:40 AM
need a rechambering done splattermatic Gunsmithing 2 06-26-2008 10:23 PM
rechambering the 338 rum... JOSE A. MARINE Gunsmithing 4 06-18-2008 12:30 AM
rechambering Warren Barrett Equipment Discussions 4 03-13-2002 09:09 PM

All times are GMT -5. The time now is 01:06 PM.

All content ©2010-2015 Long Range Hunting, LLC