close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing

Reply

PTG 11-Degree Muzzle Crown Facing Tool. .30 Cal

LinkBack Thread Tools Display Modes
  #1  
Unread 03-02-2012, 05:32 PM
Bronze Member
 
Join Date: Dec 2010
Posts: 37
PTG 11-Degree Muzzle Crown Facing Tool. .30 Cal

Does anyone have one I can borrow/rent/ buy?
Reply With Quote
  •   #2  
    Unread 03-02-2012, 05:38 PM
    Platinum Member
     
    Join Date: Dec 2011
    Location: S.E. Michigan
    Posts: 4,120
    Re: PTG 11-Degree Muzzle Crown Facing Tool. .30 Cal

    Maybe a little off base but why wouldn't an 11 degree included angle chaterless countersink perform the same opeation?
    Reply With Quote

      #3  
    Unread 03-02-2012, 06:42 PM
    Silver Member
     
    Join Date: Oct 2011
    Location: Bend, Or
    Posts: 427
    Re: PTG 11-Degree Muzzle Crown Facing Tool. .30 Cal

    It's not 11 deg. included and you also need a way to keep it lined up with the bore while the nut on the other end turns the wrench. Eye balling it probably won't yield very good results.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: PTG 11-Degree Muzzle Crown Facing Tool. .30 Cal
    Thread Thread Starter Forum Replies Last Post
    Muzzle crown improvement ? NotsubMOA Gunsmithing 1 10-22-2011 06:54 AM
    crown for muzzle break bubba36x Gunsmithing 4 08-10-2010 07:55 AM
    muzzle crown questions outfitter55 Gunsmithing 5 05-30-2010 01:03 PM
    Ptg 11 degree muzzle crown facing tool 30 cal.--(SOLD) remcraz Reloading Equipment and Components 2 06-14-2009 12:11 PM
    muzzle brake and barrel crown bigtoy302 Gunsmithing 1 08-08-2008 05:54 AM


    All times are GMT -5. The time now is 03:45 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC