close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing

Reply

Pillar Bedding Savage McMillan Stock

LinkBack Thread Tools Display Modes
  #1  
Unread 01-02-2013, 01:09 PM
Junior Member
 
Join Date: Dec 2012
Location: NW Ohio
Posts: 9
Pillar Bedding Savage McMillan Stock

Guys,

I have a new Savage 10FCP McMillan in .308. I am considering a Pillar bed Job. I'm pretty handy and the job does not scare me but I have some questions on doing the savage. Looking at my Gunsmithing books and videos on Youtube, most instruction is on 700 pattern actions. Bolts go in the front of the action and the tang. The Savage is different with a bolt at the trigger guard on in the front as you know. Looking at the stock, there does not appear to be a great deal of material there in which to bed a pillar.

Here are some photos of my stock:








Has anyone Pillar bedded one of these and do you have any photos to share of what you did?

Thanks in advance.
Reply With Quote
  •   #2  
    Unread 01-02-2013, 04:57 PM
    Silver Member
     
    Join Date: Sep 2008
    Posts: 169
    Re: Pillar Bedding Savage McMillan Stock

    When I installed a rear pillar in my save stock I removed the trigger assembly. Pillar bedded and then used a dremel tool to remove the part of the rear pillar which would have interfered with proper function
    Reply With Quote

    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 08:08 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC