Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Reply

Need some info. please

 
LinkBack Thread Tools Display Modes
  #1  
Old 01-20-2012, 08:01 PM
Bronze Member
 
Join Date: Jan 2005
Location: Wyoming
Posts: 81
Need some info. please

I have a Win. model 670a and thought it was the same as the model so I got bases for the model 70 post 64. They do not fit the 670a. The front base fits but the rear base shole spacing is way too short.
What am I missing here ?
__________________
freedom is not free just ask a vet
Reply With Quote
  #2  
Old 01-21-2012, 01:16 PM
Bronze Member
 
Join Date: Jan 2009
Posts: 39
Re: Need some info. please

If your bases are Weaver,you need a #47 for the rear as opposed to a #49.Hope this helps.
Reply With Quote
  #3  
Old 01-21-2012, 01:43 PM
Bronze Member
 
Join Date: Jan 2005
Location: Wyoming
Posts: 81
Re: Need some info. please

The bases are Leupold and are marked "post 64 "
__________________
freedom is not free just ask a vet
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Need some info. please
Thread Thread Starter Forum Replies Last Post
6.5 stw info plumber bob Reloading 1 08-20-2010 06:51 PM
6.5 WSM info djtjr Long Range Hunting & Shooting 4 05-08-2010 11:43 AM
info on 7mm rum paulmoney Rifles, Bullets, Barrels & Ballistics 4 12-18-2006 12:08 AM
any more info on the 6.5 wsm S1 gonzo exspress Rifles, Bullets, Barrels & Ballistics 2 06-16-2003 06:29 PM
6.5x.284 need info mr308 Rifles, Bullets, Barrels & Ballistics 1 04-21-2003 11:01 PM


All times are GMT -5. The time now is 09:58 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC