Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Need some help with an Uh-Oh.......

LinkBack Thread Tools Display Modes
Unread 07-31-2008, 09:05 PM
Platinum Member
Join Date: Jun 2004
Location: Texas
Posts: 1,074
Reloader, I had heard about the freezer method, but thank goodness, haven't had to test it out. If it's not mechanically locked, it should pop out. If it is mechanically locked, I would use NesikaChad's method. It should weaken the bedding compound enough that it won't matter. Good info. I would never have thought of it.

Good thread, good replies, Tom
Texas State Rifle Association Life Member
NRA Endowment Life Member

A big fast bullet will beat a little fast bullet every time
Reply With Quote
  •   #9  
    Unread 08-02-2008, 02:36 PM
    Silver Member
    Join Date: May 2004
    Location: North Louisiana
    Posts: 257

    Thanks for the great replies fellas. I'll try the freezer and pressure method 1st and then to the heat shall that not work.

    Have a Good One and Thanks again,

    Reply With Quote



    Thread Tools
    Display Modes

    All times are GMT -5. The time now is 04:49 PM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC