close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing

Reply

need a little help

LinkBack Thread Tools Display Modes
  #8  
Unread 03-03-2009, 08:19 PM
Silver Member
 
Join Date: Feb 2009
Location: Eaton, Colorado
Posts: 349
Re: need a little help

+1 on having the stock inletted.
Reply With Quote
  •   #9  
    Unread 03-04-2009, 03:36 PM
    Silver Member
     
    Join Date: Jul 2007
    Location: SW Wisconsin
    Posts: 225
    Re: need a little help

    +2, just inlet the damnded thing for the BDL bottom metal. Should be easy as both of your action screw holes are there already, just stick some inletting screws in your action, drop it in the stock and lower the bottom metal to stock on the bottom side and see what needs to be removed. scribe around the exterior of the floorplate and go at it with a dremel if you're brave for the bulk of it, then chisels or backed sandpaper (milling machine being the best if you have it!). Don't go past the lines and start to fit it by putting inletting black (or white depending on the color of the stock inlet so it shows) and take off what shows.....
    Reply With Quote

      #10  
    Unread 03-04-2009, 08:12 PM
    Bronze Member
     
    Join Date: Feb 2009
    Posts: 31
    Re: need a little help

    the stock i have has a trigger guard made into the stock
    Reply With Quote
      #11  
    Unread 03-07-2009, 07:57 PM
    Silver Member
     
    Join Date: Jul 2007
    Location: SW Wisconsin
    Posts: 225
    Re: need a little help

    still no probem, cut it off and inlet.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 06:58 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC