Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Reply

Model 700 chambering issues

 
LinkBack Thread Tools Display Modes
  #15  
Old 08-20-2008, 01:13 PM
Silver Member
 
Join Date: Jan 2008
Posts: 179
Re: Model 700 chambering issues

Quote:
Originally Posted by jmason View Post
I have some new Nosler brass that doesn't chamber completly right but doesn't require anything near the amount of force that the resized brass does.
Okay one last question before I make my prediction. Was the brass your resizing fired out of you gun or another one. Quess what I'm asking was the brass fireformed to your rifle before sizing or is the brass fireformed in another rifle?
Reply With Quote
  #16  
Old 08-20-2008, 07:54 PM
Platinum Member
 
Join Date: Feb 2008
Location: Wampum, PA
Posts: 1,513
Re: Model 700 chambering issues

It was all fired from mine........

I'm going to start another thread in the reloading section about my grouping. I did a ladder w/ rl22 got zilch for nodes. Did one for imr 4831 though I had 3. went to do charge confirmations @ 200 yds for each of my 3 perceived nodes and got one charge in each of the 3 different sittings that was good rest were 3+ inches I'm starting to feel the red headed step child of this game. My appologies to any who are red headed step children reading this.......
__________________
"I may be dumb, but I'm not stupid." - Terry Bradshaw
Reply With Quote
  #17  
Old 08-23-2008, 02:41 PM
Platinum Member
 
Join Date: Feb 2008
Location: Wampum, PA
Posts: 1,513
Re: Model 700 chambering issues

I colored a ounce fired unsized, and a brand new case with sharpie. Chambered both. Both chambered hard. Both have marks above and below the sholder crease on one side of them. Where the case body and sholder meet. I imagine at this point a smith should see it. will post findings later.
__________________
"I may be dumb, but I'm not stupid." - Terry Bradshaw
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Model 700 chambering issues
Thread Thread Starter Forum Replies Last Post
stevens model 200 long action chambering options poloairsoft Rifles, Bullets, Barrels and Ballistics 0 07-21-2011 03:52 PM
Neck Sizing, groupings, and chambering issues twiedenh Reloading 5 07-21-2011 10:09 AM
Model 7 mag issues gedsar Gunsmithing 1 07-05-2009 10:39 AM
223 AI Chambering Issues panhandlepr Long Range Hunting & Shooting 9 10-05-2006 08:58 PM
Which chambering? philip h The Basics, Starting Out 1 03-20-2005 10:11 PM

Current Poll
Do you archery hunt for elk?
YES - 31.71%
65 Votes
NO - 51.71%
106 Votes
Not yet, but I plan to. - 16.59%
34 Votes
Total Votes: 205
You may not vote on this poll.

All times are GMT -5. The time now is 07:14 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC