Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Reply

Model 7 guru's

 
LinkBack Thread Tools Display Modes
  #1  
Old 01-20-2010, 09:44 PM
Junior Member
 
Join Date: May 2009
Posts: 9
Model 7 guru's

Can someone please tell me the correct torque for the action screws for a Remington Model 7?
Also,should there be a barrel pressure point bedded in a rem.custom shop KS model 7 in 7mm08 with 20"barrel and kevlar stock ?
Thanks
Reply With Quote
  #2  
Old 01-21-2010, 07:34 PM
Bronze Member
 
Join Date: Jan 2009
Posts: 60
Re: Model 7 guru's

No guru here but I do have an early model ks in 7-08 that the groups walked with the bedding point so I removed it and never looked back. That gun shoots under a moa now to the same point of impact as the barrel heats up, which doesn't take long at the bench with the pencil barrel. Tom
Reply With Quote
  #3  
Old 01-26-2010, 04:27 PM
Bronze Member
 
Join Date: Jan 2007
Location: Mesa AZ
Posts: 63
Re: Model 7 guru's

Mine also responded for the better in removing the pressure pad....but I also skim bedded.

As far as action screw torque I don't run them in as hard as a pillar bedded stock.
Normally I get the best results around 45 in-lbs +-...YMMV... in a plain stock and around 65 in-lbs in a pillar bedded stock.

FWIW...this is what has worked for me in many stocks that I have done.
hope it helps

wes in AZ
Reply With Quote
  #4  
Old 02-05-2010, 02:13 PM
Gold Member
 
Join Date: Sep 2008
Location: Republic of NJ
Posts: 925
Re: Model 7 guru's

It's recommended that you keep non-pillar or aluminum bedded stocks to about 35 - 40 in/lbs. If it's pillar or aluminum bedded you can go up to 65 in/lbs. (which is military/law enforcement specs).

I usually run my wood stocked rifles about 35 in/lbs. This also includes if they're glass bedded.

Good luck.
__________________
Red mist. It's an addiction!
http://varmintxt.webs.com/
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Model 7 guru's
Thread Thread Starter Forum Replies Last Post
Remington Model 700 VL SS Thumbhole VS Savage Model: 12 BTCSS HUNT 24/7 Rifles, Bullets, Barrels and Ballistics 5 05-19-2012 06:01 PM
Browning guru's please help gremcat Rifles, Bullets, Barrels and Ballistics 2 11-13-2009 08:48 AM
??????? for AR Guru's spd800 The Basics, Starting Out 4 12-18-2007 03:14 PM
? for Kirby and other reloading guru's Ridge Runner Reloading 30 04-16-2007 07:47 AM
P.O. Ackley and other WildCat Guru's Books? NorthernSniper Rifles, Bullets, Barrels and Ballistics 11 07-19-2004 08:22 PM

Current Poll
Do you archery hunt for elk?
YES - 34.58%
120 Votes
NO - 48.41%
168 Votes
Not yet, but I plan to. - 17.00%
59 Votes
Total Votes: 347
You may not vote on this poll.

All times are GMT -5. The time now is 09:39 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC