Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Reply

Looking for Tooling

 
LinkBack Thread Tools Display Modes
  #1  
Old 04-25-2010, 06:29 PM
Silver Member
 
Join Date: Mar 2008
Location: PA
Posts: 339
Looking for Tooling

I'm in the process of building a new bolt for one of my remmy. I'm thinking of using a savage style extractor in the end of the one locking lug. My question is do they make a single cutter with the correct angles to install this style exractor?
Reply With Quote
  #2  
Old 04-25-2010, 08:12 PM
Platinum Member
 
Join Date: Dec 2009
Location: 4422′44″N 1082′35″W
Posts: 3,834
Re: Looking for Tooling

Unless you are just looking for something to do why dont you just order one from Pacific Tool and Gauge? I bought one for a Lapua Build Lapua bolt face M16 style extractor fluted. Very nice for less than 250 bucks
__________________
Mike

Anything less than overkill is underachievement!

" Real elk guns start with the number 3 or bigger and blow two holes, one in and one out." - My Dad
Reply With Quote
  #3  
Old 04-26-2010, 05:13 AM
Bronze Member
 
Join Date: Mar 2005
Posts: 32
Re: Looking for Tooling

Quote:
Originally Posted by Frank7mm View Post
I'm in the process of building a new bolt for one of my remmy. I'm thinking of using a savage style extractor in the end of the one locking lug. My question is do they make a single cutter with the correct angles to install this style exractor?
The best route would be to install the Savage bolt head on the Remington bolt body. They work like a charm and can be changed out for other calibers.
Reply With Quote
  #4  
Old 04-26-2010, 02:44 PM
Silver Member
 
Join Date: Mar 2008
Location: PA
Posts: 339
Re: Looking for Tooling

I'll look into that. I was thinking a different direction but that sounds good.
Reply With Quote
  #5  
Old 04-27-2010, 10:24 AM
Gold Member
 
Join Date: Jan 2007
Location: South Dakota
Posts: 753
Re: Looking for Tooling

If your just looking for a small key cutter visit MSC Industrial.
__________________
Chad Dixon
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Looking for Tooling
Thread Thread Starter Forum Replies Last Post
Old Tooling Liquidation and other trinkets NesikaChad Other Stuff For Sale 3 02-10-2010 04:30 PM
Is this a tooling mark? Wookie316 Gunsmithing 7 09-24-2009 01:56 PM
Tooling Marks on Necks From FL Die? Problem? Troutslayer Reloading 5 08-19-2009 08:35 PM
Tooling suggestions? eddybo Gunsmithing 13 05-11-2008 01:33 PM
Gre_tan tooling and fixtures daveosok Equipment Discussions 9 08-24-2005 06:31 PM

Current Poll
Spot & Stalk or Ambush For Western Deer?
MOSTLY - Spot & Stalk - 73.75%
1,020 Vote
MOSTLY - Ambush - 26.25%
363 Votes
Total Votes: 1,383
You may not vote on this poll.

All times are GMT -5. The time now is 05:29 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC