close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing

Reply

Looking for ideas on how to repair this stock

LinkBack Thread Tools Display Modes
  #1  
Unread 01-19-2013, 10:42 AM
Gold Member
 
Join Date: Jun 2004
Posts: 851
Looking for ideas on how to repair this stock







Reply With Quote
  •   #2  
    Unread 01-19-2013, 11:51 AM
    Bronze Member
     
    Join Date: Apr 2011
    Location: Vermont
    Posts: 74
    Re: Looking for ideas on how to repair this stock

    Trim it past the chip and reshape...

    M
    Reply With Quote

      #3  
    Unread 01-19-2013, 12:06 PM
    Platinum Member
     
    Join Date: Dec 2009
    Location: NW MT
    Posts: 3,075
    Re: Looking for ideas on how to repair this stock

    Do you have the chip,if so wood glue or epoxy back,temp hold with tape until glue dries. If not need same kind of wood,match grain,take broken area and cut with fine backsaw,jewlers saw or file the damaged area flat to accept a slight large repair peice,glue that as mentioned above.Let dry , then sand to shape and refinish
    Reply With Quote
      #4  
    Unread 01-19-2013, 05:26 PM
    Gold Member
     
    Join Date: Jun 2004
    Posts: 851
    Re: Looking for ideas on how to repair this stock

    Decided to go with the angle cut. Now need I need to do the finish work. Thanks for all your input!




    Reply With Quote
      #5  
    Unread 01-20-2013, 03:34 PM
    Platinum Member
     
    Join Date: Dec 2009
    Location: NW MT
    Posts: 3,075
    Re: Looking for ideas on how to repair this stock

    Ilike it better now
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 04:50 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC