close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing

Reply

lathe/mill/information website

LinkBack Thread Tools Display Modes
  #1  
Unread 01-06-2008, 01:08 PM
Platinum Member
 
Join Date: Jan 2007
Location: MS
Posts: 1,652
lathe/mill/information website

I am just starting to shop for a good mill and a lathe. Something good enough to do gun work on. I took a few machinist classes after high school so I know a very little. I am looking for some good websites to drool over equipment and maybe learn a little more about general machinist skills gunsmithin in particular. Anybody got any good links they would share?

I have a small mill/lathe combo but precision is not its strong point. It is a shopsmith eldorado. Anyone got any good ideas for any projects to help hone my limited skills?
__________________
I admit that I know just enough to be dangerous.....but dangerous at ever extending distances.
Reply With Quote
  •   #2  
    Unread 01-06-2008, 01:30 PM
    Platinum Member
     
    Join Date: Jul 2002
    Posts: 2,855
    If this works their should be a link for a move rental place , I freind is currently using it and he realy ikes the ability and all of Darrel Holland's are informative and well made.

    Professional instruction video: Professional Machine Shop Course: Lathe by Darrell Holland

    As for the equiptment , their are places all over the web to look at it but not nearly a nice as being able to fondel the actual tool on a show room floor
    __________________
    Si Vis Pacem Parabellum
    Molon Labe
    Reply With Quote

    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: lathe/mill/information website
    Thread Thread Starter Forum Replies Last Post
    smithy AT-300 LATHE/MILL jgss2 Long Range Hunting & Shooting 2 02-12-2011 09:13 PM
    Wtb falcon menace 4-14 mill/mill tbshltn Optics For Sale 1 02-01-2011 03:49 PM
    New Mill Jrigby Gunsmithing 8 07-20-2010 09:48 AM
    Mill Dot holdover cabelas90 Long Range Scopes and Other Optics 9 03-16-2009 06:48 AM
    Lathe/Mill/Drill Question royinidaho General Discussion 16 03-01-2007 05:42 AM


    All times are GMT -5. The time now is 11:07 PM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC