Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Reply

Jewell sendero upgrade help/opinion

 
LinkBack Thread Tools Display Modes
  #1  
Old 03-23-2013, 12:19 AM
Silver Member
 
Join Date: Dec 2012
Location: Las Vegas Nevada
Posts: 102
Jewell sendero upgrade help/opinion

Hello,
After much review I've decided to go with the Jewell trigger. This is going on a new sendero II 300RUM.
Is the appropriate model JT-01?
Is there a thread somewhere with an tutorial of how to install one?
Any stock alterations required on the HS standard sendero stock?
Any other help advice on how to handle this as well as who sells them that I could support.
Thanks in advance, Dave
Reply With Quote
  #2  
Old 03-23-2013, 06:47 AM
Platinum Member
 
Join Date: Jul 2004
Location: Texas
Posts: 5,193
Re: Jewell sendero upgrade help/opinion

Quote:
Originally Posted by dave300 View Post
Hello,
After much review I've decided to go with the Jewell trigger. This is going on a new sendero II 300RUM.
Is the appropriate model JT-01?
Is there a thread somewhere with an tutorial of how to install one?
Any stock alterations required on the HS standard sendero stock?
Any other help advice on how to handle this as well as who sells them that I could support.
Thanks in advance, Dave

I would recommend the one with the safety and three springs .I think it is the HVRT .7 to3.5
lbs. It is adjustable in the range i mentioned and is easy to change springs to get the preferred
weight.

There is normally some inletting to be done but it is simple. the safety interfears with the front of
the inlet when operated on some stocks and the bottom metal is to tight for the bolt release
button sometimes.

It is the best trigger made and well worth any fitting in the inletting.

As to installation, it is easier than the Remington trigger and no special tools are needed.

Good Luck.

J E CUSTOM
__________________
"PRESS ON"
Reply With Quote
  #3  
Old 03-23-2013, 06:50 AM
Gold Member
 
Join Date: Nov 2005
Location: Maryland
Posts: 796
Re: Jewell sendero upgrade help/opinion

GreatScottShooters.com - Supplying the finest accessories available for rifle shooting.

Best prices on Jewell triggers.
Reply With Quote
  #4  
Old 03-23-2013, 06:57 AM
Platinum Member
 
Join Date: Jan 2008
Location: Northeast
Posts: 2,198
Re: Jewell sendero upgrade help/opinion

Quote:
Originally Posted by dave300 View Post
Hello,
After much review I've decided to go with the Jewell trigger. This is going on a new sendero II 300RUM.
Is the appropriate model JT-01?
Is there a thread somewhere with an tutorial of how to install one?
Any stock alterations required on the HS standard sendero stock?
Any other help advice on how to handle this as well as who sells them that I could support.
Thanks in advance, Dave
The trigger should go right in without requiring any fitting. At the very least, you might have to remove some bedding block material that contacts the sides of the trigger housing with a Dremel. I use red lipstick on the protruding pins to check for contact. If there is contact, it will usually effect the bolt release movement. A great time saver is to make sure you drive the rear pin out from right to left, just enough so it still holds the bolt release/ spring assembly in place in the receiver. The front pin should drive from left to right. Below is an instruction sheet and the model listed in the Midway catalog. At this time, most suppliers have the trigger on backorder. I have been trying to get one to no avail and ended up putting a Timney on my Milspec. Its also an excellent trigger at half the price, but limits at 2# and does require that you open up sides of the trigger housing slightly to accommodate the wider trigger(which I personally prefer over the thin Jewel trigger). Hope this helps.

THE JEWELL TRIGGER MANUAL

Jewell Rifle Trigger Remington 700 40X Safety 1-1/2oz to 3 lb SS
__________________

"Let us speak courteously, deal fairly, and keep ourselves armed and ready"-T. Roosevelt
Reply With Quote
  #5  
Old 03-23-2013, 08:21 AM
Silver Member
 
Join Date: Apr 2012
Posts: 143
Re: Jewell sendero upgrade help/opinion

I recently installed one on my sendero.It was very easy. No alterations were needed.Pay attention to the spring that operates the bolt release, so that it is reinstalled properly. It took me about 15 min. I then adjusted the trigger pull to where I wanted.

You will love it and want one on all your rifles.
Reply With Quote
  #6  
Old 03-23-2013, 09:21 AM
Gold Member
 
Join Date: May 2011
Location: Damascus, MD
Posts: 841
Re: Jewell sendero upgrade help/opinion

I have replacement Jewell triggers on both of my Remington 700 Sendero SF 7mm STWs.

I absolutely love mine and I guarantee you will love yours!
__________________
Remington 700 Sendero SF 7mm STW
Vortex Viper PST 6-24x50 FFP EBR-1 MOA Reticle Scope

Remington 700 Sendero SF 7mm STW
Vortex Viper PST 6-24x50 FFP EBR-1 MOA Reticle Scope

Remington 700 LSS .257 Weatherby Magnum
Vortex Viper PST 6-24x50 FFP EBR-1 MOA Reticle Scope
Reply With Quote
  #7  
Old 03-23-2013, 09:48 AM
Official LRH Sponsor
 
Join Date: Dec 2006
Location: Utah
Posts: 125
Re: Jewell sendero upgrade help/opinion

Dave300,

A good trigger makes both the gun and shoooter better in my opinion. I try to get the customer of every custom build to included a Jewell Trigger, so I agrre you have made a good choice.
I just recieved my first of the year order from Jewell but I,m like everyone else I have sold them all and the shippments run about 8-9 weeks before the next one.
Third Generation had some hit their sight not long ago, hopefully things will get easier to soon.

Good Luck
__________________
Steve

Elk Meadow Performance
www.elkmeadowperformance.com
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Current Poll
Do You Think Slingshots Should Be Legalized For Hunting Brown Bear?
Yes - 47.54%
842 Votes
No - 52.46%
929 Votes
Total Votes: 1,771
You may not vote on this poll.

All times are GMT -5. The time now is 03:06 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC