close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing

Reply

Jewell HVR Trigger Spring Change ?

LinkBack Thread Tools Display Modes
  #1  
Unread 07-06-2009, 04:33 PM
Platinum Member
 
Join Date: Dec 2001
Location: Long Island, New York
Posts: 2,440
Jewell HVR Trigger Spring Change ?

I just receiver a new Jewell HVR for my Rem model 7. The "A" spring was installed @ the factory. I'd like to try the "B" spring. The instructions do not show how to change the spring (all three were provided) and I'd rather do it right the first time.

Can anyone help me with this or can you direct me to a site that explains or shows how this is done?
Reply With Quote
  •   #2  
    Unread 07-07-2009, 07:09 AM
    Silver Member
     
    Join Date: Dec 2005
    Location: Colorado
    Posts: 340
    Re: Jewell HVR Trigger Spring Change ?

    Check out (THE JEWELL TRIGGER MANUAL). You can just unscrew the screw that goes into the trigger and dump out the spring. When you put the new spring in, just make sure that it sits flush against the post inside, and isn't cocked to oneside or the other. Then just carefully thread the set screw back in.
    __________________
    If you like your hunting rifle, you can keep your hunting rifle.
    Reply With Quote

      #3  
    Unread 07-07-2009, 08:57 AM
    Platinum Member
     
    Join Date: Dec 2001
    Location: Long Island, New York
    Posts: 2,440
    Re: Jewell HVR Trigger Spring Change ?

    Got it - Thanks


    Quote:
    Originally Posted by visigoth View Post
    Check out (THE JEWELL TRIGGER MANUAL). You can just unscrew the screw that goes into the trigger and dump out the spring. When you put the new spring in, just make sure that it sits flush against the post inside, and isn't cocked to oneside or the other. Then just carefully thread the set screw back in.
    Reply With Quote
      #4  
    Unread 09-24-2013, 10:33 AM
    Silver Member
     
    Join Date: Feb 2011
    Location: Chubbuck, Idaho
    Posts: 464
    Re: Jewell HVR Trigger Spring Change ?

    I know this post is really old, but which screw do I pull out to replace the spring? I'm sure I could figure it out but I'm at work right now, and there is no point in pulling out the wrong one if someone knows. Thanks.
    Reply With Quote
      #5  
    Unread 09-24-2013, 10:48 AM
    Silver Member
     
    Join Date: Dec 2005
    Location: Colorado
    Posts: 340
    Re: Jewell HVR Trigger Spring Change ?

    Its the one that is located in the trigger shoe itself. There is a little allen screw near the top of the shoe. Just unscrew it all the way, and the spring will fall out. I suggest doing this on a blanket. When you put the new screw in, make sure it is aligned, up and down, and now cocked to one side, or another (usually not a problem).
    __________________
    If you like your hunting rifle, you can keep your hunting rifle.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Jewell HVR Trigger Spring Change ?
    Thread Thread Starter Forum Replies Last Post
    Jewell trigger DCGS Gunsmithing 11 04-23-2010 08:39 AM
    WTB Jewell Trigger royinidaho Gun Parts - Stocks, Barrels, Actions, etc. 2 05-04-2009 09:33 AM
    WTB Rem Jewell trigger safarihunter Gun Parts - Stocks, Barrels, Actions, etc. 3 07-26-2007 02:47 PM
    Jewell HVR Trigger for Win 70 Sendero_Man Gunsmithing 7 07-14-2007 07:22 PM
    Jewell BR trigger Rem 700 safarihunter Guns For Sale 0 11-07-2006 10:53 AM


    All times are GMT -5. The time now is 10:14 AM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC