Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Inletting screws

LinkBack Thread Tools Display Modes
Unread 05-01-2009, 11:14 AM
Junior Member
Join Date: Jun 2007
Location: Okanogan, Wa
Posts: 18
Inletting screws

Recently acquired two new stocks and need to do some inletting work on the actions. Can't seem to find inletting screws for an A Bolt SS long action. Tried Midway and Brownells. Found some for the Rem 700/721 but no Browning. Any one have any suggestions? These are headless screws that guide the action in and out as you are trying to determine fit. Thought about tring to make some out of regular action screws and cutting the heads off. But could'nt even find those. Thanks Roger
Reply With Quote

Unread 05-01-2009, 11:20 AM
Platinum Member
Join Date: Feb 2008
Location: Wampum, PA
Posts: 1,530
Re: Inletting screws

Try here:

Browning | Numrich Gun Parts Corp. | e-GunParts.com
"I may be dumb, but I'm not stupid." - Terry Bradshaw
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: Inletting screws
Thread Thread Starter Forum Replies Last Post
inletting badger m4 vs m5 arrow Rifles, Bullets, Barrels & Ballistics 0 01-04-2011 11:24 PM
Stock inletting emmagator Long Range Hunting & Shooting 2 10-24-2010 09:17 PM
Hs prercision inletting remcraz Gunsmithing 3 10-02-2009 03:03 PM
Inletting and bedding? Teutonic Gunsmithing 0 12-11-2007 12:28 PM
Have a stock that needs inletting. garsticker Gunsmithing 1 05-10-2007 07:27 PM

All times are GMT -5. The time now is 12:41 AM.

All content ©2010-2015 Long Range Hunting, LLC