close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing

Reply

HS precisond stock recoil pad

LinkBack Thread Tools Display Modes
  #8  
Unread 10-29-2007, 12:23 AM
Junior Member
 
Join Date: Oct 2007
Posts: 2
haha mine is rattling too!... which is mainly why I want it off. but it doesn't sound like whatever is inisde is going all the way to the pad. I'm thinking the but is still soild under the pad, and only the very center is hollow... might have to take off the pad then drill a decent size hole to get it out if there isn't one. which is why I was asking what was under the pad. is it solid or is there a hole?

and what exactly is under that I could screw a pad into? just self tap into the fiberglass?
Reply With Quote
  •   #9  
    Unread 10-29-2007, 07:07 AM
    Bronze Member
     
    Join Date: Nov 2002
    Location: Montana
    Posts: 56
    if there is a foam core, i would drill out two 3/4" or so holes and epoxy wooden dowels in place. this will give a base to drive some screws in.
    Reply With Quote

    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: HS precisond stock recoil pad
    Thread Thread Starter Forum Replies Last Post
    What epoxy to use on recoil pad and HS stock KDB Gunsmithing 7 02-13-2010 10:36 AM
    taking a recoil pad off an hs stock learning Gunsmithing 1 06-11-2009 09:32 PM
    how to change recoil pad on hs stock oldfamily Gunsmithing 1 10-07-2008 08:40 AM
    Remington LSS Stock - Ques. About Recoil Pad rudyortiz Equipment Discussions 3 02-02-2008 08:52 PM
    REcoil reducing stock overbore Equipment Discussions 1 10-21-2006 05:16 AM


    All times are GMT -5. The time now is 04:32 PM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC