  | How Much Barrel Whip does my 300 have? |

02-03-2010, 10:44 PM
|
|
Platinum Member
|
|
Join Date: Dec 2009
Location: Basin Wyoming
Posts: 3,041
|
|
|
How Much Barrel Whip does my 300 have?
I have a Remington 700 CDL in 300 win mag. I floated the barrel, and I can slide a piece of paper clear to the action. but my question is how much does my barrel whip so I can make sure the barrel doesn not make contact with my stock when I shoot.
__________________
Mike
Anything less than overkill is underachievement!
" Real elk guns start with the number 3 or bigger and blow two holes, one in and one out." - My Dad
|

02-04-2010, 02:19 AM
|
|
Platinum Member
|
|
Join Date: Feb 2009
Posts: 3,539
|
|
|
Re: How Much Barrel Whip does my 300 have?
I wouldn't worry about barrel whip as long as there's enough clearance between the barrel and stock. I like .03" clearance, however if you have a wood stock and subject to alot of moisture then you might want to go higher to .04". This way the barrel vibrations can occur at their natural frequency unobstructed. In general long thin barrels will have more whip than shorter thick barrels.
|

02-04-2010, 07:50 AM
|
|
Platinum Member
|
|
Join Date: Dec 2009
Location: Basin Wyoming
Posts: 3,041
|
|
|
Re: How Much Barrel Whip does my 300 have?
I probably have about that. I can easily fit a piece of paper in there all the way to the action. Thanks for the help!
__________________
Mike
Anything less than overkill is underachievement!
" Real elk guns start with the number 3 or bigger and blow two holes, one in and one out." - My Dad
|
  |
| Thread Tools |
|
|
| Display Modes |
Linear Mode
|
Similar Threads for: How Much Barrel Whip does my 300 have?
|
| Thread |
Thread Starter |
Forum |
Replies |
Last Post |
|
6mm re-barrel brand,length and barrel twist
|
mcseal2 |
Rifles, Bullets, Barrels and Ballistics |
12 |
11-07-2010 07:14 PM |
|
wtb sendero barrel or like custom barrel in 7mm or 30 or 338 mag cal or hevier
|
mayheel |
Gun Parts - Stocks, Barrels, Actions, etc. |
3 |
02-23-2010 04:18 PM |
|
barrel question. Could a ss barrel be too hard to ream????
|
oldfamily |
Rifles, Bullets, Barrels and Ballistics |
24 |
05-29-2009 08:46 AM |
|
which break, barrel length, barrel cotour, and twist?
|
nathank |
Rifles, Bullets, Barrels and Ballistics |
1 |
02-03-2009 07:31 PM |
|
barrel block,barrel and action
|
dwarren |
Guns For Sale |
1 |
02-26-2007 06:33 PM |
|
|
All times are GMT -5. The time now is 12:45 PM.