Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


how to change recoil pad on hs stock

LinkBack Thread Tools Display Modes
Unread 10-04-2008, 10:33 PM
Silver Member
Join Date: Sep 2005
Location: South Central Missouri
Posts: 332
how to change recoil pad on hs stock

Need to replace recoil pad on my pss stock, what would be a good 1" pad for it. Don't really want a limbsaver pad it would work if that is what it would take. Do they make a pad set up for this or what? Thanks Oldfamily
Reply With Quote

Unread 10-07-2008, 08:40 AM
Platinum Member
Join Date: Aug 2005
Location: Back in the south -NW FL..
Posts: 1,160
Re: how to change recoil pad on hs stock

Oldfamily ,

I read here somewhere -a good technique to get the pad off was to put the stock in the freezer overnight then pry it out ,the cold makes the glue hard and it comes out much easier.
As to which pad will fit -i'm not sure but they make the models that you can sand down to fit w/a beltsander.
Hope this helps a little.-Mike
AIPAC for president !!!!!!!!!!!!!!!!!!!
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: how to change recoil pad on hs stock
Thread Thread Starter Forum Replies Last Post
Remington 700 VLS free float/glass bed/change stock bowietx Gunsmithing 8 07-25-2011 05:17 PM
Rem 700P 338 Lapua stock change need help articman Rifles, Bullets, Barrels & Ballistics 8 06-23-2010 11:02 PM
What is needed to change my stock? TNsniper Gunsmithing 2 02-06-2010 06:53 PM
my dad is giving me his model 70 30-06 can i change my barrel and stock and calibre? nathank Gun Parts - Stocks, Barrels, Actions, etc. 1 12-27-2008 12:31 AM
Remove Stock---will it change zero crackher Rifles, Bullets, Barrels & Ballistics 4 03-07-2008 02:57 AM

All times are GMT -5. The time now is 08:58 PM.

All content ©2010-2015 Long Range Hunting, LLC