close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing

Reply

help with rem 700 mag problems

LinkBack Thread Tools Display Modes
  #1  
Unread 01-07-2013, 11:23 AM
Junior Member
 
Join Date: Mar 2011
Location: dundee-or
Posts: 6
help with rem 700 mag problems

i put this in rifles section but this might be a better spot for it.
i recently bought a model 700xcr .300 rum and while checking rounds i noticed that it wouldn't cycle 1 round out of the magazine. So i put all three rounds in magazine and when i cycle the bolt the top round jumps out of gun and the 2nd round does the same thing and the last round starts to go out and then the rear of shell drops a little bit and bolt rides over it and stops. I also have a 338 rum and I took the box and spring-follower from it out and put it in the 300 and worked for a little while and then started doing the same thing. I have learned alot from this site and was hoping someone would have an answer thanks -Andy
Reply With Quote
  •   #2  
    Unread 01-08-2013, 07:59 PM
    alf alf is offline
    Gold Member
     
    Join Date: Nov 2007
    Location: S. W. Wisconsin
    Posts: 717
    Re: help with rem 700 mag problems

    Start by taking a pair of pliers and bending the very top of the magazine box outward a little at a time. That makes the round sit further under the feed rails, and stops them from jumping out.

    The "W" in the spring may need to be bent a little further apart, giving more pressure to the follower for the last round.

    Guns that don't feed a real PITA, but when you get one to work by yourself, it makes you wanna set down and have a smoke......
    Reply With Quote

      #3  
    Unread 01-13-2013, 10:32 PM
    Bronze Member
     
    Join Date: Jun 2010
    Location: Colorado USA
    Posts: 85
    Re: help with rem 700 mag problems

    I have had the same problem with mine. Mine is a 7mmRUM, and I just replaced the whole spring and shell plate with one out of a Browning A bolt magazine. The scissor spring works every time. The cartridges wouldn't jump out of mine, but what yours is doing on the last round is what mine did all of the time. It would get very bound up, and if I would have applied much force it would've surely damaged the case.
    Reply With Quote
      #4  
    Unread 01-15-2013, 11:25 PM
    Junior Member
     
    Join Date: Mar 2011
    Location: dundee-or
    Posts: 6
    Re: help with rem 700 mag problems

    So i got it working it took a couple things to get it right. I met the guy i bought it from and we swapped the bottom metal,spring and follower from his 375 rum and that fixed the last round jamming problem and the first round jumping out also, so he ordered a new spring and follower But not the 2nd round popping out so we tried nosler custom ammo and it fed fine but not my rem reloads, still cant figure that one out
    but i got to looking at the bolts from my 300 rum (the one im having problems with) and my 338 rum and swapped them and it worked great so i looked at the bolts and in the middle bottom of the boltface on the 300 there was a pronounced lip and not on the 338 bolt so i carefully polished the bolt face down a little at a time and it started working. so all i can think is, it was made wrong at the factory. But why did the nosler custom rounds work
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 07:09 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC