Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


help, bolt not wanting to come out

LinkBack Thread Tools Display Modes
Unread 08-01-2013, 08:00 AM
Bronze Member
Join Date: Aug 2012
Location: Superior AZ
Posts: 54
Re: help, bolt not wanting to come out

same exact gun as your friend
Reply With Quote

Unread 08-05-2013, 03:46 PM
Silver Member
Join Date: Jul 2007
Location: SW Wisconsin
Posts: 225
Re: help, bolt not wanting to come out

Typically on those factory remingtons just look at the top forward portion of the bolt handle as you lift the bolt handle. If just that corner is contacting and at the top of the stroke you need to slap the SOB up to unlock your action after firing a round it's the bolt handle placement and your primary extraction just as Jim stated. Most often you'll also see a nice little divot on that bolt handle (root) right on that corner where it's hitting. There's a lot of them out there that do this exact thing.
Reply With Quote


Thread Tools
Display Modes

All times are GMT -5. The time now is 10:52 AM.

Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC