Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


gunsmith to re-barrel

LinkBack Thread Tools Display Modes
Unread 01-25-2011, 09:45 AM
Bronze Member
Join Date: May 2010
Location: Alaska
Posts: 56
gunsmith to re-barrel

Sorry if this is a dumb question but I've just spent an hour searching this forum. I'd like reccomendations for a smith to re- barrel and match the light contour (Kimber 8400 Montana) so major stock work is not needed. I'd like to end up with a 1/2 MOA barrel which might be dificult with one so light.The 'smith I've used for years is retired and I've not gotten good reports on others in my area. Thanks in advance.
Reply With Quote

Unread 01-25-2011, 01:53 PM
Platinum Member
Join Date: Dec 2008
Location: Great Falls, MT
Posts: 9,783
Re: gunsmith to re-barrel

Any of the sponsor smiths here will meet your requirement/expectations ... I'm pretty they'll chime in as soon as their workloads warrants it.

Meantime, you can browse through gun photos section for some of their masterpieces.

Good luck!


I voted for my "FREEDOM", "GUNS", and "MONEY" - keep the change - UNK.

"I am always proud of my country!"

"Leadership Rule #2: Don't be an ***hole." - Maj Gen Burton Field.
Reply With Quote
Unread 01-25-2011, 02:54 PM
Join Date: Mar 2004
Location: Danville, PA
Posts: 1,129
Re: gunsmith to re-barrel

I'd be glad to talk with you about your build. Feel free to check out some of my work under the gun photos section and also my website Montour County Rifles I look forward to talking with you.


Reply With Quote


Thread Tools
Display Modes

Similar Threads for: gunsmith to re-barrel
Thread Thread Starter Forum Replies Last Post
Recommended Gunsmith to re-barrel rifle luke5678 Long Range Hunting & Shooting 7 02-10-2011 08:14 PM
Gunsmith needed and gunsmith question.? timmyatnop Gunsmithing 2 12-20-2010 11:08 AM
Need a gunsmith datsjeep Rifles, Bullets, Barrels & Ballistics 1 03-25-2010 01:36 PM
Looking for a gunsmith 38-55 red2dogs Gunsmithing 2 09-18-2009 03:20 PM
Switch Barrel Set up ????? for a gunsmith. Agunner012 The Basics, Starting Out 5 02-05-2004 02:40 PM

All times are GMT -5. The time now is 08:07 AM.

All content ©2010-2015 Long Range Hunting, LLC