close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing

Reply

glue in barrel block

LinkBack Thread Tools Display Modes
  #8  
Unread 04-30-2007, 06:15 PM
Platinum Member
 
Join Date: Feb 2004
Location: Pennsyltucky
Posts: 2,630
Re: glue in barrel block

Can you just epoxy the barrel to the stock, assuming the the recoil lug is also glued in, and be done with it?
Is this a viable bedding method?

this might be the ultimate way to bed a shooting system.the down side is,as stated,most use a torch and hyd. press to change the barrel.you just need a new stock each time you change barrels.

if you want the ultimate, make the barrel, action, scope base and stock from one piece of steel.that would give you the best "bedding"
__________________
davesonlinedeals.com
Reply With Quote
  •   #9  
    Unread 04-30-2007, 08:11 PM
    Silver Member
     
    Join Date: Oct 2004
    Location: Atlanta, GA
    Posts: 309
    Re: glue in barrel block

    I have extensive epoxy experience and share the folowing: 1. the unfilled two part epoxies <font color="red"> </font> are basic 3,000psi adhesives. 2. The filled expoxies have less bonding strength, arround 2,000psi. 3. If you have a split barrel block and it, the lower half, is glued to the stock as my 300wsm is, no recoil lug ( shooting 210 gr Bergers), is needed and everything else is free floated giving you the best of all words. This system won the 2003 LG in Iowa BR Nationals. 4. If you e-mail chris@longshotrifles.com he will give you an update on this new type of barrel block. Cordially, Overbore [img]/ubbthreads/images/graemlins/cool.gif[/img]
    ps: I used straight glue-ins in the 1970's; one time to get everyting exactly right---better odds in Reno [img]/ubbthreads/images/graemlins/blush.gif[/img]
    __________________
    Member, Revolutionary War Veterans Association
    Reply With Quote

    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: glue in barrel block
    Thread Thread Starter Forum Replies Last Post
    topless glue in barrel block lazylabs Gunsmithing 4 07-31-2007 03:31 PM
    Barrel Block or Aluminum bedding block question royinidaho General Discussion 4 02-26-2007 03:24 PM
    To barrel block or not to barrel block GJW Long Range Hunting & Shooting 16 01-19-2007 09:35 PM
    Barrel block Northman Equipment Discussions 1 01-30-2006 04:29 PM
    Barrel Block for 50 cal. ncharter Rifles, Bullets, Barrels & Ballistics 2 02-09-2004 11:50 PM


    All times are GMT -5. The time now is 03:05 PM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC