Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


First Bedding Job

LinkBack Thread Tools Display Modes
Unread 01-12-2013, 10:05 PM
Platinum Member
Join Date: Dec 2009
Location: Holland, MI
Posts: 1,805
Re: First Bedding Job

Yep, or you can leave it alone. Usually (operative word) the filler agent will come off even without release agent on it.

Note the photo above. You're only going to put a thin coat of Devcon along the sides of the action. Look at the space between your action and the stock - we're generally not talking about a lot of room to fill.
Reply With Quote

Unread 01-13-2013, 11:03 PM
Posts: n/a
Re: First Bedding Job

Here is how I did my stock a while back, I taped off the openings.
Work of Art is on it's way.

Reply With Quote


Thread Tools
Display Modes

All times are GMT -5. The time now is 01:07 PM.

Powered by vBulletin ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC