Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


External boltstop for XP-100 rifle

LinkBack Thread Tools Display Modes
Unread 07-20-2007, 09:50 PM
Bronze Member
Join Date: Apr 2007
Posts: 53
External boltstop for XP-100 rifle

Can anyone suggest a good gunsmith who makes & installs an external boltstop on an XP action that I made into a 22-250 rifle? I have a bolt stop, spring and pin from a McMillan, but do not have a smith/machinist to do it. Would be a lot nicer and easier to clean at the dogtowns with an easy way to remove the bolt.
Thanks! Bob Adler 706-568-7619 or
Reply With Quote
  •   #2  
    Unread 07-21-2007, 10:34 AM
    Gold Member
    Join Date: Oct 2006
    Posts: 870
    Sinclair internation makes a nice bolt stop... It's a little big depending on what you like.

    It's not hard to install. If there is any gunsmith close they can install it. It really should have a flat spot in the side of the reciever but you could just drill and tap a hole for it........just won't look as nice.
    Reply With Quote



    Thread Tools
    Display Modes

    Similar Threads for: External boltstop for XP-100 rifle
    Thread Thread Starter Forum Replies Last Post
    External Ballistics johnnyk Rifles, Bullets, Barrels & Ballistics 3 11-21-2009 01:25 PM
    External scope mounts milanuk Long Range Scopes and Other Optics 1 12-31-2008 03:41 PM
    External boltstop for XP-100 rifle Robert J. Adler Gunsmithing 3 07-23-2007 10:01 AM
    Best external ballistics program jrdoty The Basics, Starting Out 6 06-27-2005 09:46 AM
    Why Knowledge of External Ballistics? Blaine Fields Rifles, Bullets, Barrels & Ballistics 2 09-08-2002 10:19 PM

    All times are GMT -5. The time now is 11:11 PM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC