Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Reply

DIY pillar bedding?

 
LinkBack Thread Tools Display Modes
  #29  
Old 03-14-2009, 07:19 AM
Silver Member
 
Join Date: Dec 2007
Posts: 297
Re: DIY pillar bedding?

the way I see it the pliiers stop crushing of the stock.
The top of the pillers are the same as the bedding metral. I am no gun smith by no means. I did a home job to see if my rifle was worth any more work? And it was just got it back. FYI cut recrown,lap lugs,reset head space,triger job, When I picked it up got a new stock well used a take off in great shape. This time it going to the smith for piller bedding and float cut adjustable comb in to it. If I were to do any more work on it what would all of you sugest ?

Last edited by cva54; 03-14-2009 at 07:50 AM.
Reply With Quote
  #30  
Old 03-14-2009, 09:55 AM
Gold Member
 
Join Date: Dec 2007
Location: Sagauache County, Co...3170 sq miles, not a single stop light!
Posts: 667
Re: DIY pillar bedding?

great post and i have learned a ton. i have always been a fan of pillar bedding, and every gun i have done this to has benefitted from it by producing better accuracy. the thing i can really tell a difference with is when you take a gun apart, for cleaning, adjusting or whatever, you very seldom have to re-sight it in. everything stays the same. when you crank down on the action screws, they just stop. some rifles that are not pillar bedded seem like you could just keep tightning the crews until you suck them right thru the stock. AJ
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: DIY pillar bedding?
Thread Thread Starter Forum Replies Last Post
Glass bedding vs. Pillar Bedding summitsitter The Basics, Starting Out 7 06-20-2013 01:09 AM
Action bedding & Pillar bedding mkbaquet The Basics, Starting Out 4 01-20-2011 09:45 PM
tuning up my rem 700 bdl. pillar bedding ?? camoman80 Gunsmithing 3 05-27-2010 09:44 AM
Pillar Bedding Homer Rifles, Bullets, Barrels & Ballistics 1 04-11-2005 10:22 AM
Pillar Bedding Inukshuk Rifles, Bullets, Barrels & Ballistics 2 03-28-2005 06:55 PM


All times are GMT -5. The time now is 03:11 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC