Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Chamber dimensions

LinkBack Thread Tools Display Modes
Unread 01-11-2010, 07:58 PM
Bronze Member
Join Date: Aug 2009
Posts: 58
Chamber dimensions

I am in the prosess of putting together a 6mm-06, i got the stock, bedded everything put a new trigger on it, and am going to duracoat entire gun in the next few days. Now for my problem, i,m heading for Texas in 3 wks. Was going to break in barrel, and work up some loads....BUT i have no idea what to trim the brass at, im using 25-06 and necking down. Does anybody know how to cast a chamber, or know what would be safe to trim brass at?
P.S. My gunsmith just had a stroke so i can,t ask him, any and all help would be appreciated....Thanks....Pat
Reply With Quote
  •   #2  
    Unread 01-11-2010, 08:15 PM
    Platinum Member
    Join Date: Jun 2007
    Location: Wilmington NC
    Posts: 4,751
    Re: Chamber dimensions

    Case Gauges & Headspace Tools - Sinclair Chamber Length Gage

    Sinclair makes a chamber length guage you can use to measure the exact length dimensions.

    Reply With Quote



    Thread Tools
    Display Modes

    Similar Threads for: Chamber dimensions
    Thread Thread Starter Forum Replies Last Post
    Receiver dimensions ? ken snyder Gunsmithing 2 04-26-2011 02:14 PM
    Factory vs. Custom chamber dimensions Geezer Rifles, Bullets, Barrels & Ballistics 4 02-11-2009 09:55 PM
    Chamber dimensions for a fitted no-turn neck LRHWAL Rifles, Bullets, Barrels & Ballistics 4 09-17-2008 12:58 AM
    338 Rum Chamber dimensions D.Camilleri Rifles, Bullets, Barrels & Ballistics 2 01-13-2008 01:59 PM
    300 RUM Case Dimensions Triple BB Rifles, Bullets, Barrels & Ballistics 1 08-06-2003 07:15 AM

    All times are GMT -5. The time now is 02:40 PM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC