Cerakote action on already bedded stock?

[Stumpm2]

I am thinking about getting one of my rifles cerakoted and I was wondering if this would require the action/stock to be rebedded. My rifle is currently pillar and glass bedded and I do not want to impair the bedding I currently have. Any thoughts.opinions on this would be appreciated. I would really prefer not to the rebed the action.

[Coyboy]

coat it and bolt it back in, won't hurt a thing.

[Outlaw6.0]

Originally Posted by Coyboy

coat it and bolt it back in, won't hurt a thing.

Agreed, my last rig was bedded then coated, as long as the coating thickness is as even as possible it won't effect anything.

[OrrHunter1]

What is the buildup of this coating?

[hideboiler]

This is an old question but I was recently thinking the same thing when I rebarreled my R700. According to the guy who Cerikotes all my stuff he said it's .001 thick and would not affect a thing. I came on the forum for a second opinion and feel a little bit better about it now.

[sj-pratt]

Applying a coat of gun kote ads about .0004 I would think cerecote is simular.

In a perfect world it would make your action a press fit but we don't live in a perfect world.

Don't lose alot asleep over it.

[Kevin Cram]

I always prefer to bed before Cerakoting. I mask off the recoil lug just below the stock line though. The barreled action will fit back in a bit easier. It's a tight fit if you Cerakote the whole lug but it will be fine.