Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


BSA Monarch extractor needed

LinkBack Thread Tools Display Modes
Unread 11-14-2007, 07:57 PM
Junior Member
Join Date: Feb 2006
Posts: 27
BSA Monarch extractor needed

I just broke my extractor on my 30-06 rifle. It is a BSA and I have a 243 BSA Monarch and the extractor seem to be identical. Would someone have one for sale? Or Would you know where I could get one? Any help will be appreciated. Thanks,
Reply With Quote

Unread 11-14-2007, 08:43 PM
Platinum Member
Join Date: Mar 2003
Location: Southern Wisconsin
Posts: 1,381
You could poke around here and see what you can find. Welcome to Numrich Gun Parts Corp.

Ignorance can be treated with education, sadly there is no cure for stupidity.
Reply With Quote
Unread 11-14-2007, 10:08 PM
Gold Member
Join Date: Sep 2005
Posts: 748

You shoul have commercial Mauser98's you must be carefull when ordering a replacement ones their are lots aff subtle differences between the 3 major sizes. Their is a large ring, short ring and ugoslavian mauser it is the same length as the small ring but the diameter off the large ring. I am fairly sure the large ring is the model you have call numerick as stated above or Mitchells Mausers there in the US have the rifle with you the two measurements you need are the distnce between the takedown screws and the width off the front off the action.

Cheers Bill
Reply With Quote
Unread 11-25-2007, 11:35 AM
Bronze Member
Join Date: Dec 2006
Posts: 47
This one might take some time-try the Canadian gun parts suppliers.

If you know a friendly machinest it would be possible to make another one using the .243 extractor as a sample.

It's worth the effort as these are really fine rifles with some glass bedding .

Reply With Quote
Unread 12-09-2010, 09:30 AM
Junior Member
Join Date: Dec 2010
Posts: 1
Re: BSA Monarch extractor needed

Any luck finding the extractor? I need the same part , I've been looking for three years and stopped for a year , just started looking again.The riffle is too nice scrap.
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: BSA Monarch extractor needed
Thread Thread Starter Forum Replies Last Post
m16 extractor??? yzm19 Gunsmithing 6 10-24-2009 01:33 PM
M-16 style extractor kit? Andy W Gunsmithing 4 04-12-2008 11:15 PM
Need Extractor Dave in Idaho Gunsmithing 2 10-18-2007 07:02 AM
Extractor??? TireurDelite Rifles, Bullets, Barrels & Ballistics 1 05-16-2006 08:43 PM
Extractor problems johnny k. Rifles, Bullets, Barrels & Ballistics 11 09-11-2004 11:00 PM

All times are GMT -5. The time now is 01:52 PM.

All content ©2010-2015 Long Range Hunting, LLC