Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Reply

Bedding a TC encore

 
LinkBack Thread Tools Display Modes
  #1  
Old 04-16-2007, 09:19 AM
Silver Member
 
Join Date: Oct 2006
Location: Memphis, TN
Posts: 117
Bedding a TC encore

I've read some posts on bedding the forearm of a TC Encore. Anyone know where to get instructions or a someone that can do this? I have no experience bedding a rifle but I am willing to try if it is not too difficult
__________________
I just know enough about long range shooting to kno that I dont know sh*t about long range shooting!
Reply With Quote
  #2  
Old 04-16-2007, 10:33 AM
SPONSOR
 
Join Date: Jun 2007
Location: Wyoming
Posts: 2,690
Re: Bedding a TC encore

specialty pistols, Mike Bellm's, and or chase mountain's forum may be helpful. I know some guys have done it themselves with good redults.
Reply With Quote
  #3  
Old 04-18-2007, 05:45 AM
Silver Member
 
Join Date: Nov 2004
Location: Michigan
Posts: 218
Re: Bedding a TC encore

Have you looked into adding a hanger bar? Designed to free float the stock. I use a few washers to achieve similar results.
__________________
QDMA Member
7STW Club
Reply With Quote
  #4  
Old 04-19-2007, 09:46 PM
Silver Member
 
Join Date: Oct 2004
Location: california
Posts: 362
Re: Bedding a TC encore

a hanger bar will run you about $28 i just orderd 2 of then from Stratton Custom
Reply With Quote
  #5  
Old 04-20-2007, 07:55 AM
Silver Member
 
Join Date: Nov 2004
Location: Michigan
Posts: 218
Re: Bedding a TC encore

Steve Stratton just did an Encore trigger job, cheapest around at $50.00. Good guy!
__________________
QDMA Member
7STW Club
Reply With Quote
  #6  
Old 04-21-2007, 04:06 PM
Bronze Member
 
Join Date: Dec 2006
Location: Mississippi
Posts: 98
Re: Bedding a TC encore

Steve Stratton is working on #2 for me along with 3 forearms being piller bedded...Great guy to work with....Great feeling trigger.. Both of his sons do barrel work. [img]/ubbthreads/images/graemlins/wink.gif[/img]
Reply With Quote
  #7  
Old 04-21-2007, 06:51 PM
Silver Member
 
Join Date: Oct 2004
Location: california
Posts: 362
Re: Bedding a TC encore

i had a ton of questions for steve he was very helpful so much so i ordered a new frame and rifle stock set last night. he called me this moring to verify everything and he is picking up the MGM barrel im having built for this frame and fitting a hanger bar on it and shipping everything at the same time. that will save some money on shipping great guy to do buissness with and highly reccomended

DB
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Bedding a TC encore
Thread Thread Starter Forum Replies Last Post
Bedding a stock with Aluminum bedding blocks? Atlas 00 Gunsmithing 1 07-20-2011 03:38 PM
WTS--Encore 454 Casull Encore barrel and furniture hitman2565 Gun Parts - Stocks, Barrels, Actions, etc. 4 08-05-2010 09:24 AM
question on encore forearm bedding job. oldfamily Rifles, Bullets, Barrels & Ballistics 0 03-31-2008 11:04 AM
Is a bedding block better than pilar bedding pdbsa The Basics, Starting Out 8 06-20-2006 08:37 AM
Skim bedding an aluminum bedding block. Ankeny General Discussion 19 05-27-2006 10:07 PM


All times are GMT -5. The time now is 05:20 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC