Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Reply

Bedding problem

 
LinkBack Thread Tools Display Modes
  #8  
Old 03-19-2010, 12:13 PM
Silver Member
 
Join Date: Nov 2006
Posts: 190
Re: Bedding problem

I have used wood to hammer on, alluinum, and a whole bunch of other tricks. Just got the back to pop loose, now just have to keep messing with it too get the recoil lug to let go. Thanks for all your help.
Reply With Quote
  #9  
Old 03-19-2010, 12:19 PM
Gold Member
 
Join Date: Jan 2007
Location: South Dakota
Posts: 753
Re: Bedding problem

yeps!
__________________
Chad Dixon
Reply With Quote
  #10  
Old 03-20-2010, 10:14 AM
Silver Member
 
Join Date: Nov 2009
Posts: 137
Re: Bedding problem

I've seen pullers made similar to the one NesikaChad has pictured. Only they were made from a 2x4 block with a cutout in it so that it will slip over the action and be touching the stock on both sides. The same principle as the one pictured. Just not as fancy and elaborate. Then all you need is a C-clamp to pull the action out with. One end in the reciever, and the other on top of the block. Crank her out.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Bedding problem
Thread Thread Starter Forum Replies Last Post
Bedding problem? bkondeff Rifles, Bullets, Barrels & Ballistics 5 08-21-2011 08:49 PM
Bedding a stock with Aluminum bedding blocks? Atlas 00 Gunsmithing 1 07-20-2011 03:38 PM
Action bedding & Pillar bedding mkbaquet The Basics, Starting Out 4 01-20-2011 09:45 PM
Chamber problem or ammo problem? Topshot Rifles, Bullets, Barrels & Ballistics 5 06-09-2010 08:14 PM
Skim bedding an aluminum bedding block. Ankeny General Discussion 19 05-27-2006 10:07 PM


All times are GMT -5. The time now is 09:40 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC