close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing

Reply

Bedding Compound Removal ????

LinkBack Thread Tools Display Modes
  #15  
Unread 07-18-2013, 09:43 PM
Platinum Member
 
Join Date: Dec 2008
Location: rathdrum, id.
Posts: 4,869
Re: Bedding Compound Removal ????

Quote:
Originally Posted by Buttermilk View Post
Glad you got it off.

Certain epoxies can be softened quite nicely when in contact with Methanol alcohol and sometimes gasoline.

Learned this the hard way when running methanol in two stroke Banshees with epoxied ports.
I'll bet! I once busted the cyl. sleeve on a snowmobile dragster the day before a drag race (the cylinder was bored so far over that the O ring pressure from the head busted a chunk out of the inside) I used JB weld to glue everything back together by permanently bonding the o Ring into the groove and then bolting the head on before it cured. I put a heat lamp on it over night and not only won the open class the followng day but ran it for another two months before it came unglued!....rich
Reply With Quote
  •   #16  
    Unread 07-19-2013, 12:39 AM
    Silver Member
     
    Join Date: Dec 2005
    Location: Good Ol' Oklahoma
    Posts: 370
    Re: Bedding Compound Removal ????

    Cool! Sounds like you've had a few fun experiences too!
    Reply With Quote

    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 08:51 AM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC